SNMP traps for Pool members status change

Hi Alex,

 

Did you ever get a resolution for this problem? We recently upgraded to 11.2.1 from 10.4 and are no longer seeing any SNMP traps. We have a node still on 10.4 and they work fine. I was just curious as to what you found with your issue. Thanks!

 

Hi Darrell, yes I got a resolution from F5 guys. My problem was in the configuration of my management network. My F5 devices have management IP addresses in different network subnet than my production network, where SNMP server lives. So when they sent their SNMP traps they did it by IP address from production network not by management one. So when those traps were received by SNMP server it just didn't recognize them, because F5 devices have only management addresses assigned to them. So I had to make F5 devices send SNMP using management network using this command: Code tmsh create /sys management-route lognet network "SNMP Server IP address/255.255.255.255 gateway "management network gateway IP Address" /Code