For more information regarding the security incident at F5, the actions we are taking to address it, and our ongoing efforts to protect our customers, click here.

Forum Discussion

Tal_BenHaim_112's avatar
Tal_BenHaim_112
Icon for Nimbostratus rankNimbostratus
Jun 26, 2007

SNMP - Collecting data on throughput rates

Hi,     I wrote an application that makes a report of traffic throughput rate on each   virtual address, and the interface using i-control.     The results i get are much low than i e...
dev
devops
iControl
John_Arnold_106's avatar
John_Arnold_106
Icon for Nimbostratus rankNimbostratus
Jul 19, 2007
Link to Manual:

 

https://tech.f5.com/home/bigip-next/manuals/bigip9_4/bigip9_4mgmt/BIG_IP_9_4_nsm_guide-16-1.htmlwp1053731

 

 

The two throughput lines in the GUI graph represent Client-side bits and Server-side bits. The lines are an aggregate of TX and RX.

 

 

If your telecom limit is 30Mb/s Full Duplex (that's a weird rate...) your servers could theoretically send 30Mb/s and receive 30Mb/s at the same time, and BIGIP would report the (RX+TX) aggregate of 60Mb/s.