For more information regarding the security incident at F5, the actions we are taking to address it, and our ongoing efforts to protect our customers, click here.

Forum Discussion

Jason_martin_18's avatar
Jason_martin_18
Icon for Nimbostratus rankNimbostratus
Aug 05, 2015

Show config on F5 GTM v9.x

I'm working with some really old GTMs that are running code level v9.x . I've used a command in the past to pull the full config from the device but cannot, for the life of me remember what the command is. I know with v9 LTMs I can pull the full config by using the b list command. Do any of you remember what the bigpipe command is to see the full config? Any help would be greatly appreciated!

 

Thanks, Jason

 

BIG-IP DNS
management

3 Replies

  • Mike_Kahler_488's avatar
    Mike_Kahler_488
    Historic F5 Account
    Aug 05, 2015

    If your version is running 9.4.x or newer, you can use the "b export" command. Search AskF5 for SCF or single configuration file. But this will not include your GTM config. There is no way to list GTM config elements in 9.x. Most elements are contained in /config/gtm - wideip.conf, topology.inc and region.user. ( As I recall ).

     

    • Jason_martin_18's avatar
      Jason_martin_18
      Icon for Nimbostratus rankNimbostratus
      Aug 06, 2015
      We have a mixture, some are 9.3 and some are 9.4 devices. We are basically trying to get a script going within HPNA that will pull the important part of the configs for us. We have over 200 devices, only about 8-10 of them are GTMs. Is there a command to pull the GTM config only?
    • Mike_Kahler_488's avatar
      Mike_Kahler_488
      Historic F5 Account
      Aug 06, 2015
      For 9.x, there are no bigpipe commands to pull GTM config elements. 10.x and beyond has tmsh commands to view GTM objects. Therefore, the only script type command I can think of is, "cat /config/gtm/wideip.conf"