Forum Discussion
send Request Logging through Management IP
- Apr 12, 2023
According to the following article it is not possible to configure request logging to be sent out via the MGMT port (but you can do it by using an iRule and applying it to a virtual server).
Configuring the BIG-IP system to send high-speed logs through the management interface (f5.com)
IVD On the F5 some configuration exists that will only use the routed interfaces of the device rather than the management IP (interface) of the device. You can test this theory with HSL but going into the CLI and adding a management interface route to the destination but pointed at the appropriate gateway for the management interface. This is assuming that your management interface sits on a different network than the routed interfaces. The following command should be the syntax.
create sys management-route <name> <destination_IP> <destination_mask> <gateway_IP>
If for some reason this syntax doesn't work for you I would start hitting the ? after "management-route" and follow the sub-menus it displays.
According to the following article it is not possible to configure request logging to be sent out via the MGMT port (but you can do it by using an iRule and applying it to a virtual server).
Configuring the BIG-IP system to send high-speed logs through the management interface (f5.com)
Recent Discussions
Related Content
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com