script delete after upgrade

Hello.

F5 uses LVM to map their partitions.

Only some partitions are shared between all different volumes (upgrade boot locations)

• /shared - /dev/mapper/vg--db--sda-dat.share.1
• /var/log - /dev/mapper/vg--db--sda-dat.log.1

The rest of the partitions are independent for each volume (boot location).

# lvs
  LV                       VG        Attr      LSize    Pool Origin Data%  Move Log Cpy%Sync Convert
  app.ASWADB.set.1.mysqldb vg-db-sda -wi-ao---   12.00g                                             
  dat.log.1                vg-db-sda -wi-ao---  500.00m                                             
  dat.maint.1              vg-db-sda -wi-a----  300.00m                                             
  dat.share.1              vg-db-sda -wi-ao---   20.00g                                             
  dat.swapvol.1            vg-db-sda -wi-ao--- 1000.00m                                             
  set.1._config            vg-db-sda -wi-ao---    3.17g                                             
  set.1._usr               vg-db-sda -wi-ao---    3.29g                                             
  set.1._var               vg-db-sda -wi-ao---    3.00g                                             
  set.1.root               vg-db-sda -wi-ao---  440.00m 
  set.2._config            vg-db-sda -wi-ao---    3.17g                                             
  set.2._usr               vg-db-sda -wi-ao---    3.29g                                             
  set.2._var               vg-db-sda -wi-ao---    3.00g                                             
  set.2.root               vg-db-sda -wi-ao---  440.00m 

As you can see above, there are two sets of var/usr/config/root partitions (1 and 2).

These numbers correspond with the digits used in your volume (HD1.1 and HD1.2).

# tmsh show sys software
 
-------------------------------------------------
Sys::Software Status
Volume  Product  Version  Build  Active    Status
-------------------------------------------------
HD1.1    BIG-IP   12.1.5  0.0.6     yes  complete
HD1.2    BIG-IP   12.1.3.4  0.0.2     no  complete

So, your lost script should be located in the next partition:

/dev/mapper/vg--db--sda-set.#._var

Where '#' is the number of your previous volume.

Regards,

Dario.