Question about Monitor-to-pool member association

Hi HG,

That can be easily done by associating a specific monitor to one or more pool members.

Here are some tips:

Selecting an explicit monitor association

Once you have associated a monitor with a pool, the BIG-IP system automatically associates that monitor with every pool member, including those members that you add to the pool later. However, in some cases you might want the monitor for a specific pool member to be different from that assigned to the pool. In this case, you must use the Health Monitors setting to specify that you want to explicitly associate a specific monitor with the pool member.
You can also configure this setting to prevent the BIG-IP system from associating any monitor with that pool member.
To explicitly associate a monitor with a pool member, locate the Health Monitors setting and select Member Specific, which causes the Select Monitors setting to appear. Then configure the Select Monitors setting as described in the following section.
To ensure that the BIG-IP system associates no monitor with the pool member, set the Health Monitors setting to None.

Member Specific: Specifies that the system monitors this pool member with the monitors configured in Select Monitors.