Forum Discussion
AlvinNG_GTI
Altostratus
AltostratusPossible to Compare and Diff configuration by ucs files
Hi, I have some configuration change on LTM, and do the ucs backup before and after also. But I don't hope to compare those ucs files to find the different by download those archives and open anoth...
Hello Alvin Ng,
There are another methods to compare configs, but they are more rudimentary.
1. Compare SCF files using TMSH
# Extract intial config tmsh save sys config file /shared/tmp/initial_config.scf no-passphrase # Extract final config tmsh save sys config file /shared/tmp/final_config.scf no-passphrase # Compare both files tmsh show sys config-diff /shared/tmp/initial_config.scf /shared/tmp/final_config.scf | egrep -e "\s{3}\|\s{3}" -e "[<]$" -e "^\s*[>]"2. Similar to the previous command, you can use diff to compare both bigip.conf files
# First, extract the bigip.conf file from both UCS # Compare both files diff /shared/tmp/initial_bigip.conf /shared/tmp/final_bigip.conf | egrep -e "\s{3}\|\s{3}" -e "[<]$" -e "^\s*[>]"3. You can also use Notepad++ to compare them, from my experience, better compare feature than diff.
Hope this helps.
Hello Alvin_Ng.
Actually, the Big-IQ solution implements a UCS comparator.
https://support.f5.com/csp/article/K40275495
For this reason, there are not many other tools to compare them.
AlvinNG_GTIAltostratus
AltostratusHi Dario,
Thanks your reply.
Oh, but I just have BIG-IP LTM hardware platform only. I would like to find whether have a way to do it by BIG-IP system tmsh or configuration utility.
Anyway, thanks your information to let me know that have more option on BIG-IQ.
Thanks and Best Regards,
Alvin Ng
Hello Alvin Ng,
There are another methods to compare configs, but they are more rudimentary.
1. Compare SCF files using TMSH
# Extract intial config tmsh save sys config file /shared/tmp/initial_config.scf no-passphrase # Extract final config tmsh save sys config file /shared/tmp/final_config.scf no-passphrase # Compare both files tmsh show sys config-diff /shared/tmp/initial_config.scf /shared/tmp/final_config.scf | egrep -e "\s{3}\|\s{3}" -e "[<]$" -e "^\s*[>]"2. Similar to the previous command, you can use diff to compare both bigip.conf files
# First, extract the bigip.conf file from both UCS # Compare both files diff /shared/tmp/initial_bigip.conf /shared/tmp/final_bigip.conf | egrep -e "\s{3}\|\s{3}" -e "[<]$" -e "^\s*[>]"3. You can also use Notepad++ to compare them, from my experience, better compare feature than diff.
Hope this helps.