Forum Discussion

EL's avatar
EL
Icon for Nimbostratus rankNimbostratus
May 19, 2015

One arm deployment with multiple vlan server segement

Hi All   Good day to you! I would like to ask regarding one arm f5 deployment. the requirement is as below we have trunk port from F5 to core switch and cater of a few of vlan server segment, let...
application delivery
deployment
design
LTM
Max_Q_factor's avatar
Max_Q_factor
Icon for Cirrocumulus rankCirrocumulus
May 19, 2015

I think you have hit upon the answer. As long as auto last hop is enabled and all of the back end servers are on one of the three VLANs then you may not need any routes (for the production traffic) as auto last hop should take care of all of the incoming connections.

 

You may need specific routes if you are referencing things like a syslog, ntp, or AD/LDAP server that is not on one of those three VLANs.

 

EL's avatar
EL
Icon for Nimbostratus rankNimbostratus
May 19, 2015
btw is it possible to create another vlan, let say vlantransit and I create the default gateway point to this vlantransit. so if the auto lash hop not working then if will look for the routing table. if let say client access VS serverA then the core switch will forward the traffic to vlan ServerA then the return traffic to the client will use vlantransit if auto last hop not working Thanks