Forum Discussion
EL
Nimbostratus
NimbostratusOne arm deployment with multiple vlan server segement
Hi All
Good day to you!
I would like to ask regarding one arm f5 deployment. the requirement is as below we have trunk port from F5 to core switch and cater of a few of vlan server segment, let...
Max_Q_factor
Cirrocumulus
CirrocumulusI think you have hit upon the answer. As long as auto last hop is enabled and all of the back end servers are on one of the three VLANs then you may not need any routes (for the production traffic) as auto last hop should take care of all of the incoming connections.
You may need specific routes if you are referencing things like a syslog, ntp, or AD/LDAP server that is not on one of those three VLANs.
ELbtw is it possible to create another vlan, let say vlantransit and I create the default gateway point to this vlantransit. so if the auto lash hop not working then if will look for the routing table. if let say client access VS serverA then the core switch will forward the traffic to vlan ServerA then the return traffic to the client will use vlantransit if auto last hop not working Thanks- Max_Q_factorThat should work as well. Auto last hop should work as long as the initiating mac address is still valid.
TortiCirrus
hi, what is with healthcheck requests? auto last hop doesn't work for that, because the system itself is the client. If there isn't a configured route, the systeme takes management interface and management IP for the requests.- boneyard
MVP
are you asking a question or stating a fact? if it is a question please rephrase as i don't understand it.
