Forum Discussion
Adel_N_114257
Nimbostratus
NimbostratusMigrating Config from TMOS 10.2.4 to 11.4, using SCF migration
Hi all,
So we have planned to upgrade/migrate our 6400 running 10.2.4 to some 5050s running 11.4.
as a first step we have taken a .scf file from the 6400 and tried to load it into a lab VE,...
Adel_N_114257Nimbostratus
NimbostratusSo it seems like the only thing that I can do is to installed 10.2.4 VE perform the upgrade to 11.4 and the migrate the config from the VE to the 5000 series.
I keep getting the below syntax error:
Last login: Mon Aug 24 11:55:01 2015 from 10.128.1.1 [root@device1:Active] config bigpipe import /var/local/scf/Cap2.scf Saving configuration to /var/local/scf/.backup-0.scf. Reading configuration from /config/low_profile_base.conf. Reading configuration from /defaults/config_base.conf. Reading configuration from /usr/share/monitors/base_monitors.conf. Reading configuration from /config/profile_base.conf. Reading configuration from /config/daemon.conf. Reading configuration from /var/local/scf/Cap2.scf. Renaming /var/local/scf/.backup-0.scf to /var/local/scf/backup.scf. Loading the configuration ... BIGpipe interface creation error: 01070318:3: The requested media for interface 1.1 is invalid. [root@device1:Active] config
Below is the section related to the interfaces, from the .scf file:
interface 1.1 { media fixed 1000baseT full } interface 1.2 { media fixed 1000baseT full
} interface mgmt { media fixed 1000baseT full
I tried leaving these sections blank but got the same error.
Can someone help??
Adel_N_114257Nimbostratus
Nimbostratushad to manually change the scf file to reflect the below, but changing the interface on each line.
}
interface 1.1 {
media fixed 10GbaseT full
}