Maintenance page without doing SSL bridging and using HTTP profile

The problem is our business require traffic to be end to end encrypted for that I am using performanceL4 and after that I am not able to host maintenence page on f5 using iFiles as if I use http profile with perfomanceL4 then it breaks the connection. Is there a way that can be used to host a maintenence page on f5 using iFile.

may this be usable?

// config

[root@ve13a:Active:In Sync] config  tmsh list ltm virtual bar
ltm virtual bar {
    destination 172.28.24.10:443
    mask 255.255.255.255
    pool foo
    profiles {
        fastL4 { }
    }
    rules {
        qux
    }
    source 0.0.0.0/0
    source-address-translation {
        type automap
    }
    translate-address enabled
    translate-port enabled
    vs-index 13
}
[root@ve13a:Active:In Sync] config  tmsh list ltm pool foo
ltm pool foo {
    members {
        200.200.200.101:443 {
            address 200.200.200.101
            session monitor-enabled
            state down
        }
    }
    monitor fake
}
[root@ve13a:Active:In Sync] config  tmsh list ltm rule qux
ltm rule qux {
when CLIENT_ACCEPTED {
  if { [active_members [LB::server pool]] < 1 } {
    virtual sorrypage
  }
}
}

[root@ve13a:Active:In Sync] config  tmsh list ltm virtual sorrypage
ltm virtual sorrypage {
    destination 0.0.0.0:443
    ip-protocol tcp
    mask any
    profiles {
        clientssl {
            context clientside
        }
        http { }
        tcp { }
    }
    rules {
        sorrypage_rule
    }
    source 0.0.0.0/0
    translate-address disabled
    translate-port enabled
    vlans-enabled
    vs-index 14
}
[root@ve13a:Active:In Sync] config  tmsh list ltm rule sorrypage_rule
ltm rule sorrypage_rule {
when HTTP_REQUEST {
  HTTP::respond 200 content "this is sorry page\n" noserver
}
}

// test

[root@centos1 ~] curl -ik https://172.28.24.10
HTTP/1.0 200 OK
Connection: Keep-Alive
Content-Length: 19

this is sorry page

The problem is our business require traffic to be end to end encrypted for that I am using performanceL4 and after that I am not able to host maintenence page on f5 using iFiles as if I use http profile with perfomanceL4 then it breaks the connection. Is there a way that can be used to host a maintenence page on f5 using iFile.

may this be usable?

// config

[root@ve13a:Active:In Sync] config  tmsh list ltm virtual bar
ltm virtual bar {
    destination 172.28.24.10:443
    mask 255.255.255.255
    pool foo
    profiles {
        fastL4 { }
    }
    rules {
        qux
    }
    source 0.0.0.0/0
    source-address-translation {
        type automap
    }
    translate-address enabled
    translate-port enabled
    vs-index 13
}
[root@ve13a:Active:In Sync] config  tmsh list ltm pool foo
ltm pool foo {
    members {
        200.200.200.101:443 {
            address 200.200.200.101
            session monitor-enabled
            state down
        }
    }
    monitor fake
}
[root@ve13a:Active:In Sync] config  tmsh list ltm rule qux
ltm rule qux {
when CLIENT_ACCEPTED {
  if { [active_members [LB::server pool]] < 1 } {
    virtual sorrypage
  }
}
}

[root@ve13a:Active:In Sync] config  tmsh list ltm virtual sorrypage
ltm virtual sorrypage {
    destination 0.0.0.0:443
    ip-protocol tcp
    mask any
    profiles {
        clientssl {
            context clientside
        }
        http { }
        tcp { }
    }
    rules {
        sorrypage_rule
    }
    source 0.0.0.0/0
    translate-address disabled
    translate-port enabled
    vlans-enabled
    vs-index 14
}
[root@ve13a:Active:In Sync] config  tmsh list ltm rule sorrypage_rule
ltm rule sorrypage_rule {
when HTTP_REQUEST {
  HTTP::respond 200 content "this is sorry page\n" noserver
}
}

// test

[root@centos1 ~] curl -ik https://172.28.24.10
HTTP/1.0 200 OK
Connection: Keep-Alive
Content-Length: 19

this is sorry page