Forum Discussion
Lync Server 2010 Deployment Guide Update
The TMOS v11 iApp for Lync 2010 is here! http://bit.ly/r3NSup Use this new iApp for faster, easier configuration of LTM for Lync.
Thanks!
James
Josh_41258
Nimbostratus
NimbostratusRobert,
I have heard success stories from people using NAT, and the Topology builder actually allows you to specify a NAT address for the A/V role. I believe that the only real restriction for the A/V role is that you cannot use SNAT. This is a pretty good reference: http://www.shudnow.net/2012/04/25/lync-2010-edge-servers-and-ip-requirements-nat-vs-public-ip/
Still working on the config, but I'll update as soon as I get things working.
Josh