Forum Discussion
Nimbostratusltm show connection any
fgl037@(dcaslb30)(cfg-sync In Sync)(/S1-green-P:Active)(/Common)(tmos) show sys connection ss-server-addr 10.2.188.117%24 ss-server-port 80 Sys::Connections any6.any any6.any 10.1.9.11%24:61142 10.2.188.117%24:80 tcp 1 (slot/tmm: 1/9) none any6.any any6.any 10.1.9.13%24:61238 10.2.188.117%24:80 tcp 1 (slot/tmm: 1/3) none any6.any any6.any 10.1.9.12%24:61028 10.2.188.117%24:80 tcp 2 (slot/tmm: 1/8) none Total records returned: 3 fgl037@(dcaslb30)(cfg-sync In Sync)(/S1-green-P:Active)(/Common)(tmos) show sys connection cs-server-addr 10.1.8.48%24 | grep 10.2.188.117 fgl037@(dcaslb30)(cfg-sync In Sync)(/S1-green-P:Active)(/Common)(tmos)
could any one show me the lights what any6.any on client side and floating ip and show connection on vip, it shows no connection to that node
any issue?
Aditya_248044Your output shows the below:
Sys::Connections
any6.any any6.any 10.1.9.11%24:61142 10.2.188.117%24:80 tcp 1 (slot/tmm: 1/9) none
any6.any any6.any 10.1.9.13%24:61238 10.2.188.117%24:80 tcp 1 (slot/tmm: 1/3) none
any6.any any6.any 10.1.9.12%24:61028 10.2.188.117%24:80 tcp 2 (slot/tmm: 1/8) noneSo i believe your client IP and Virtual Server IPs are showing as any6.any
10.1.9.12%24 will be your self IP and 10.2.188.117%24 is your pool member.Can you try just tmsh show sys connection | grep VS_IP
For any6.any below may help:
https://support.f5.com/csp/article/K7758
https://support.f5.com/csp/article/K7208
george_liu_2124thanks for reply
we checked that there is no one connect profile on that VIP however on server side dmo440-a@dcvslx1599 $ netstat -na | grep :80 tcp 0 0 10.2.188.115:80 0.0.0.0:* LISTEN tcp 0 0 10.2.188.114:48114 10.1.8.48:80 TIME_WAIT tcp 1 0 10.2.188.114:48112 10.1.8.48:80 CLOSE_WAIT tcp 1 0 10.2.188.114:48120 10.1.8.48:80 CLOSE_WAIT tcp 0 0 10.2.188.114:48156 10.1.8.48:80 ESTABLISHED tcp 1 0 10.2.188.114:48094 10.1.8.48:80 CLOSE_WAIT tcp 0 0 10.2.188.114:48158 10.1.8.48:80 ESTABLISHED tcp 0 0 10.2.188.114:48140 10.1.8.48:80 ESTABLISHED tcp 0 0 10.2.188.114:48142 10.1.8.48:80 ESTABLISHED tcp 1 0 10.2.188.114:48110 10.1.8.48:80 CLOSE_WAIT tcp 0 0 10.2.188.114:48134 10.1.8.48:80
it seems that f5 send FIN to server to close the connection however server did not respond- george_liu_2124
10.1.9.11, 12 and .13 are source NAT being natted ip address 10.2.188.117 is the pool member
- Aditya_248044
The output shows load balancing happening all fine between the pool members : 10.2.188.119 , 10.2.188.121 and 10.2.188.117.
10.1.8.48 being your virtual server
10.2.188.114,10.2.188.116 and 10.2.188.118 being your source IPs.10.2.188.114%24:44428 10.1.8.48%24:80 10.1.9.13%24:44428 10.2.188.119%24:80 tcp 66 (slot/tmm: 1/8) none
10.2.188.116%24:52890 10.1.8.48%24:80 10.1.9.12%24:52890 10.2.188.121%24:80 tcp 10 (slot/tmm: 1/4) none
10.2.188.118%24:36408 10.1.8.48%24:80 10.1.9.12%24:36408 10.2.188.117%24:80 tcp 30 (slot/tmm: 1/1) none
Aditya_MehraCirrus
Your output shows the below:
Sys::Connections
any6.any any6.any 10.1.9.11%24:61142 10.2.188.117%24:80 tcp 1 (slot/tmm: 1/9) none
any6.any any6.any 10.1.9.13%24:61238 10.2.188.117%24:80 tcp 1 (slot/tmm: 1/3) none
any6.any any6.any 10.1.9.12%24:61028 10.2.188.117%24:80 tcp 2 (slot/tmm: 1/8) noneSo i believe your client IP and Virtual Server IPs are showing as any6.any
10.1.9.12%24 will be your self IP and 10.2.188.117%24 is your pool member.Can you try just tmsh show sys connection | grep VS_IP
For any6.any below may help:
https://support.f5.com/csp/article/K7758
https://support.f5.com/csp/article/K7208