Forum Discussion
george_liu_2124
Nimbostratus
Nimbostratusltm show connection any
fgl037@(dcaslb30)(cfg-sync In Sync)(/S1-green-P:Active)(/Common)(tmos) show sys connection ss-server-addr 10.2.188.117%24 ss-server-port 80
Sys::Connections
any6.any any6.any 10.1.9.11%24:61142 10...
Aditya_248044Nimbostratus
NimbostratusYour output shows the below:
Sys::Connections
any6.any any6.any 10.1.9.11%24:61142 10.2.188.117%24:80 tcp 1 (slot/tmm: 1/9) none
any6.any any6.any 10.1.9.13%24:61238 10.2.188.117%24:80 tcp 1 (slot/tmm: 1/3) none
any6.any any6.any 10.1.9.12%24:61028 10.2.188.117%24:80 tcp 2 (slot/tmm: 1/8) none
So i believe your client IP and Virtual Server IPs are showing as any6.any
10.1.9.12%24 will be your self IP and 10.2.188.117%24 is your pool member.
Can you try just tmsh show sys connection | grep VS_IP
For any6.any below may help:
https://support.f5.com/csp/article/K7758
https://support.f5.com/csp/article/K7208
Aditya_248044Nimbostratus
NimbostratusThe output shows load balancing happening all fine between the pool members : 10.2.188.119 , 10.2.188.121 and 10.2.188.117.
10.1.8.48 being your virtual server
10.2.188.114,10.2.188.116 and 10.2.188.118 being your source IPs.
10.2.188.114%24:44428 10.1.8.48%24:80 10.1.9.13%24:44428 10.2.188.119%24:80 tcp 66 (slot/tmm: 1/8) none
10.2.188.116%24:52890 10.1.8.48%24:80 10.1.9.12%24:52890 10.2.188.121%24:80 tcp 10 (slot/tmm: 1/4) none
10.2.188.118%24:36408 10.1.8.48%24:80 10.1.9.12%24:36408 10.2.188.117%24:80 tcp 30 (slot/tmm: 1/1) none
