Forum Discussion
Ganesh_Garg
Nimbostratus
NimbostratusLTM pool members with diffrent subnet
I have a requirement, where load needs to be balanced between 2 servers which are on different subnet. Is it possible for LTM to balance the load with SNAT setting to Automap. for example: -
Member-1: - IP:10.10.10.175 Mask: 255.255.255.192 GW: 10.10.10.129
Member-2: - IP: 10.10.10.82 Mask: 255.255.255.224 GW:10.10.10.65
1 Reply
arpydaysyes there is no problem with this as long as traffic can be routed there and back. i.e. put routes in the F5 for both pool member networks and add a route for the F5 egress floating Self-ip if needed in your routers. The last step may not needed if your servers have a default g/w and that g/w router is directly attached to the F5
cheers
