Forum Discussion

KJ_50941's avatar
KJ_50941
Icon for Nimbostratus rankNimbostratus
Nov 30, 2009

I can't Browse to GUI Interface

Hi , all

 

 

this is new F5 box, I can ping F5 LTM, but can't Browse to GUi, I change my cable from stright through to Cross over no lcuk. any advise greatfully appriciated.

 

 

 

thx

 

 

kia

 

management
monitoring
  • KJ_50941's avatar
    KJ_50941
    Icon for Nimbostratus rankNimbostratus
    Nov 30, 2009
    yes, I am trying to connect through mgmt, any idea how can I get to gui.

     

     

    thx

     

     

    kia
  • KJ_50941's avatar
    KJ_50941
    Icon for Nimbostratus rankNimbostratus
    Nov 30, 2009
    SSH doesn't work either, BIGIP_Base.conf show that TCPssh and 443 is enable

     

     

    kia
  • The_Bhattman's avatar
    The_Bhattman
    Icon for Nimbostratus rankNimbostratus
    Nov 30, 2009
    Hi Kia,

     

    I am assuming that you are connected directly to the management port.

     

     

    Do a telnet 443 on your pc connected to the management port

     

     

    Also do a telnet 22

     

     

    if the screen blanks out on either of them then it means the LTM is listening on 443 and/or ssh.

     

     

    If it's not then check to see if your PC isn't running any software firewalls that could be blocking you from accessing the management port.

     

     

    if you still are having problems then I would suggest you call F5 support and they can help you better on determine what is exactly causing the issue.

     

     

    I hope this helps

     

     

     

    Bhattman