Forum Discussion

KJ_50941's avatar
KJ_50941
Icon for Nimbostratus rankNimbostratus
Nov 30, 2009

I can't Browse to GUI Interface

Hi , all     this is new F5 box, I can ping F5 LTM, but can't Browse to GUi, I change my cable from stright through to Cross over no lcuk. any advise greatfully appriciated.     ...
management
monitoring
The_Bhattman's avatar
The_Bhattman
Icon for Nimbostratus rankNimbostratus
Nov 30, 2009
Hi Kia,

 

I am assuming that you are connected directly to the management port.

 

 

Do a telnet 443 on your pc connected to the management port

 

 

Also do a telnet 22

 

 

if the screen blanks out on either of them then it means the LTM is listening on 443 and/or ssh.

 

 

If it's not then check to see if your PC isn't running any software firewalls that could be blocking you from accessing the management port.

 

 

if you still are having problems then I would suggest you call F5 support and they can help you better on determine what is exactly causing the issue.

 

 

I hope this helps

 

 

 

Bhattman