Forum Discussion

Linda_01_162621's avatar
Linda_01_162621
Icon for Nimbostratus rankNimbostratus
Jan 23, 2015

How to check if an iRule is active

PLEASE HELP. I am trying to apply an iRule to a virtual server. So I am using the below code for testing if the iRule is active. All the below code suppose to do is to redirect all traffic to google...
Linda_01_162621's avatar
Linda_01_162621
Icon for Nimbostratus rankNimbostratus
Jan 25, 2015

Thank you everyone for your help.

 

It turns out that, the virtual server was not getting any connections. So, I downgraded from ver 11.6 to 11.4 (not sure if made any difference though)

 

I was able to solve the problem by creating only one wildcard virtual server that supports all protocols, and have it load balanced my internet connection(s).

 

However with this, I am only able to get UDP traffic through (selected it on the configuration -> protocol. I can't get any TCP through, I can't even ping the machine I am streaming video to (streaming works though).

 

My objective is get video, FTP and SIP from the internal LAN through the virtual server (profiles, iRule, etc) via load balanced ISPs to the internet.

 

StephanManthey's avatar
StephanManthey
Icon for Nacreous rankNacreous
Jan 25, 2015
Hi Linda, you can create multiple network virtual servers 0.0.0.0/0 to listen on the same VLAN if you select specific transport protocols and/or service ports. So in addition to your wildcard virtual server listening on UDP you can create another one on TCP/0 (any) with the same configuration (to handle all TCP traffic) and a specific one on TCP/80 (mode "Standard" with an http-profile and your iRule to redirect traffic). Another virtual server can be created to handle "all" protocols. In coexistence with the virtual servers it will handle all unmatched traffic (i.e. outgoing ICMP or IPSec data). Thanks, Stephan