Forum Discussion
Nimbostratushow initiate iquery from 1 GTM to another post upgrade
Hi,
We are going in for image upgrade of our GTM tommorow. I came to know that post upgrade we need to run iquery to check if GTM sync is working fine. Please if you can let me know how to do that
5 Replies
- JRahm
Admin
Use iqdump to validate iquery communication. Further troubleshooting processes here in Solution 13690.
Brad_Parker_139Nacreous
If iquery is connected all your GTMs defined in "Servers" will be green. If they are not green there could be an iquery issue. What you can alos do to confirm iquery is functioning probably is to look at netstat to see if the connections are established using
.netstat -an | grep 4353https://support.f5.com/kb/en-us/solutions/public/13000/600/sol13690.htmltroubleshooting
- JRahmpopped this thread up earlier and didn't refresh before answering! Nice work sir.
Brad_ParkerCirrus
If iquery is connected all your GTMs defined in "Servers" will be green. If they are not green there could be an iquery issue. What you can alos do to confirm iquery is functioning probably is to look at netstat to see if the connections are established using
.netstat -an | grep 4353https://support.f5.com/kb/en-us/solutions/public/13000/600/sol13690.htmltroubleshooting
- JRahmpopped this thread up earlier and didn't refresh before answering! Nice work sir.
