Forum Discussion

k2networks_2342's avatar
k2networks_2342
Icon for Nimbostratus rankNimbostratus
Nov 16, 2015

Failed upgrade from 11.6.0 >> 12.0.0

I am failing an upgrade from 11.6.0 >> 12.0.0 with the following error.   error: result: info: mount: proc already mounted or /mnt/tm_install/19632.iYk0K0/proc/busy info: mount: according to mtab,...
application delivery
BIG-IP
LTM
  • Brad_Parker_139's avatar
    Brad_Parker_139
    Nov 16, 2015

    Looks like the problem is you have chosen your new v12 volume as the source on the config install. "Install Configuration: Yes Source Volume: HD 1.2:12.0.0". HD 1.1 should be the source in your case.

     

nathe's avatar
nathe
Icon for Cirrocumulus rankCirrocumulus
Nov 16, 2015

k2networks,

What about if you select No to "Install Configuration"? Does it then boot up fine? If this works then you could boot back into the 11.6.0 volume and use the cpcfg command to copy the configuration to the new volume. See Using the cpcfg command to copy a configuration from one boot location to another

If it doesn't boot up using the Activate screen then I'd drop into the CLI and execute the command 

reboot volume 1.2

Hope this helps,

N