Forum Discussion

mali77_57143's avatar
mali77_57143
Icon for Nimbostratus rankNimbostratus
Feb 28, 2013

F5 LTM creating VLANs etc

I have a VLAN SVI (VLAN5) on our cores. I created another VLAN (VLAN6) in the database which will be the virtual servers for VLAN5.   So basically users can hit the IP from VLAN6 which then will ...
basic
getting started
new to f5
mali77_57143's avatar
mali77_57143
Icon for Nimbostratus rankNimbostratus
Mar 07, 2013
Posted By nitass on 03/07/2013 03:33 PM

 

ltm virtual 10.1.6.11 {

 

destination 10.1.6.11:any

 

ip-protocol tcp

 

mask 255.255.255.255

 

pool VMWare_ViewPool

 

profiles {

 

tcp { }

 

}

 

translate-port disabled

 

vlans-disabled

 

} can you try "snat automap" under the virtual server configuration?

 

 

Ah finally some kind of success so now certainly I got the certificate error but I was able to log in using the View Client. Thank you, you are a genius. Now what about the whole static routing issue I'll need to create static routes for every single node as I add more ? On the cores I have a route to 10.1.6.0/24 network via 10.1.250.241 which is the floating IP of VLAN250 (Internal VLAN on F5) is that a best practice?

 

Also this SNAT auto map what exactly is happening here ? I was trying to see if I can find the mappings any where in the stats but I can't.