Forum Discussion

rfc19's avatar
rfc19
Icon for Nimbostratus rankNimbostratus
Sep 05, 2012

F5 HA Causes Flapping of LTM Objects

Hi all,

 

We are running a HA pair of F5 Viprion 2400s (Active/Standby) and a single traffic group that resides on a vCMP Guest.

 

The device redundancy is working well, however ever since I created a "HA Group" our nodes keep flapping from the Active device to the Standby device, and back every so often.\

 

Initially, I had configured incorrect values for the weight and active bonus, however I have now set both of these to a much higher value on the Active device and we are still experiencing the same issue. I have resorted to not syncing the LTM config as a temporary workaround to this issue while we are still in the testing phase.

 

The setup in question only has 2 members associated to the pool.

 

Any advice would be greatly appreciated.

 

Regards

 

No RepliesBe the first to reply