Forum Discussion
NimbostratusF5 GTM sync group
CirrostratusInteresting question. At first I was going to point you at System->Configuration->Global Traffic->General, but that only tells you which sync group the unit you're on is in. And that's not really your question. I'm only running 10.2.4, and I don't know of any way to determine this using the admin gui or any TMSH commands. However, I think you can figure this out using a secondary method:
This article has a useful nugget:
http://support.f5.com/kb/en-us/solutions/public/13000/700/sol13734.html "TCP port 4353 must be allowed between devices BIG-IP GTM synchronization group members use TCP port 4353 to communicate. You must verify that port 4353 is allowed between BIG-IP GTM devices."
So you can do a tcpdump looking at port 4353, and you should see all the other F5 devices communicating through iquery. If you have some LTMs in there, you'll have to filter those out. It looks like you can also use netstat. This command gave me the output I was expecting for my environment - it showed the local GTM and the only other GTM in its sync group:
netstat -antp |grep 4353 |grep big3d
Terry_Pikesimple script to run from the command line of a GTM: will display other F5's connected on port 4353 echo " " echo " These are the GTM systems currently connected to THIS sych group and listening on 4353 " echo " " echo " " _connected=`netstat -antp |grep 4353 |grep big3d | grep ffff | awk -F: '{print $8}'` for file in $_connected do nslookup $file | grep name done
