For more information regarding the security incident at F5, the actions we are taking to address it, and our ongoing efforts to protect our customers, click here.

Forum Discussion

Misty_Spillers_'s avatar
Misty_Spillers_
Icon for Nimbostratus rankNimbostratus
Feb 14, 2013
Solved

Exchange iapp for multiple Exchange servers (different customers)

I'm on version 11.2.1 and using f5.microsoft_exchange_2010_cas.2012_06_08.     I created an "APM will provided secure remote access" iapp for one of our customers and it worked for the most p...
automation
devops
iApps
management
TMSH
  • mikeshimkus_111's avatar
    mikeshimkus_111
    Jun 19, 2013
    Misty,

     

    This morning I successfully tested deploying two separate Exchange environments behind a single BIG-IP running APM. I can think of at least two features required by this solution that are only available in BIG-IP v11.3 and above, which are the AAA server pool and client-initiated forms SSO.

     

     

    You will also want to use the latest version of the iApp, RC3, which we expect to release in the next day or so. Can you send me a private message on DevCentral with your email contact info? I can let you know as soon as that RC has been declared.

     

    Mike
mikeshimkus_111's avatar
mikeshimkus_111
Historic F5 Account
Feb 27, 2013
Sorry, I intended that you would compare the iRules created for the 1st and 2nd customers, not the duplicate of the 1st iApp. At any rate, a good way to troubleshoot is to go to System>Logs>Configuration>Options and set the APM SSO log to debug level. Then, ssh into the BIG-IP and run a "tail -f /var/log/apm" command while the error is happening. F5 support can assist with this if necessary.