Errors 800 - 405 in Management Pack F5 SCOM

This type of error surfaces when the F5 Management Pack rule overrides are not properly set up. It is possible that you have targeted the 'Enabled' property of a rule override against a class that is not the "F5 Monitoring Service". As a rule of thumb when creating F5 Management Pack overrides (either collection rule overrides or threshold rule overrides), you should always target the 'Enabled' property of the rule override against "All objects of class F5 Monitoring Service". All the other properties for rule overrides (such as 'Interval', etc.) should be targeted against the relevant F5 configuration objects (e.g. F5.Device, F5.LtmPoolMember, etc).

 

 

A detailed article on correctly creating rule overrides for the F5 Management Pack can be found here:

 

http://devcentral.f5.com/wiki/default.aspx/MgmtPack/PerformanceCollectionAndMonitoring.html

 

 

To fix your problems, I would first remove the existing F5 Management Pack rule overrides and then start over again, following the steps described in the article above.

 

 

If you need further assistance with setting up F5 MP rule overrides, please let us know.

 

 

Julian

 

F5 Management Pack Team