Forum Discussion
soymanue
Nimbostratus
NimbostratusConfigSync issue with LTM 11.2 HF1
Hello
I have upgraded two BIG-IP 3600 from version 11.1 to 11.2 HF1.
High Availability seems to be working, but ConfigSync fails.
Both devices show "Disconnected" state.
If you go to Device Management > Devices the other peer appears with its older information.
I've tried to force ConfigSync from console:
tmsh run cm config-sync to-group /Common/device-group-failover-67cbdf7d77ca
tmsh run cm config-sync to-group device-group-failover-67cbdf7d77ca
But nothing happens.
In /var/log/ltm file there are several messages like this:
Can't connect to CMI peer 192.168.96.251, port:6699, Transport endpoint is not connected
Telent to the other peer's 6699 port doesn't work:
telnet 192.168.96.251 6699
Trying 192.168.96.251...
telnet: connect to address 192.168.96.251: Connection refused
telnet: Unable to connect to remote host: Connection refused
Any idea?
31 Replies
El-Guapo_29797Just a silly question and not sure if this issue is resolved or not. But in new 11.2.1 sync has changed and it shows disconnected unless you are in Common partition, if you are not on common partition. Make sure you are on active unit, go to common partition, click on F5-name(Self), from sync drop down, select sync device to group, under Force, check mark Overwrite configuration and Click on Sync.
