Forum Discussion
NimbostratusCertificate SSL Virtual Server
Hi, when I use SSL at virtual server to portal page it generate this message: Invalid method in request \x16\x03\x03
5 Replies
- Kevin_Stewart
Employee
\x16\x03\x03 looks like an SSL ClientHello (or some other client-initiated SSL handshake message.
How do you have the SSL profile configured and how do you have the profile applied to the virtual server?
Vijay_ECirrus
Are you seeing the error logs on the F5 LTM ? Any other logs associated with it - before/after the logs ?
Bart_18836-
Are you using client and server ssl profiles ?
-
Can you try to telnet to your pool member from bigip : telnet ip port Then type: GET /
See if the server responds , if you get content back it might be that your server does not expect ssl traffic.
sacolomi_132333- Yes, I use client and server ssl profiles.
- I do telnet IP Virtual server and port 443, the conection is ok, but GET / not response If I do telnet IP server and other port, the conection is ok and GET / response ok.
- Bart_18836
Then try this.
From loadblancer:
openssl s_client -connect pool_member_ip:443
Then type "GET /"
If you get response it means thatbserver ssl configuration is ok if not then it means you have to take closer look at it.
-
