HTTPS Virtual Servers on 8000/8011 not working
Hello everyone! I am having an issue I am hoping to get some help with. Setup: 1 HTTPS Virtual Server with IP a.a.a.a port 443 doing SSL offloading to b.b.b.b on port 80. Site A Working! 1 HTTPS Virtual Server with IP a.a.a.a port 8000 doing SSL offloading to b.b.b.b on port 8000. Site B not working. 1 HTTPS Virtual Server with IP a.a.a.a port 8011 doing SSL offloading to b.b.b.b on port 8011. Site C not working. I have deployed all 3 with the F5 HTTP iApp. I am seeing no traffic to my pools for site B and C. I am getting this from both sites B and C in a tcp dump: Transmission Control Protocol, Src Port: 65265, Dst Port: 8011, Seq: 0, Len: 0 Source Port: 65265 Destination Port: 8011 [Stream index: 0] [TCP Segment Len: 0] Sequence number: 0 (relative sequence number) Acknowledgment number: 0 Header Length: 32 bytes Flags: 0x002 (SYN) 000. .... .... = Reserved: Not set ...0 .... .... = Nonce: Not set .... 0... .... = Congestion Window Reduced (CWR): Not set .... .0.. .... = ECN-Echo: Not set .... ..0. .... = Urgent: Not set .... ...0 .... = Acknowledgment: Not set .... .... 0... = Push: Not set .... .... .0.. = Reset: Not set .... .... ..1. = Syn: Set [Expert Info (Chat/Sequence): Connection establish request (SYN): server port 8011] [Connection establish request (SYN): server port 8011] [Severity level: Chat] [Group: Sequence] .... .... ...0 = Fin: Not set [TCP Flags: ··········S·] Window size value: 8192 [Calculated window size: 8192] Checksum: 0x66c3 [unverified] [Checksum Status: Unverified] Urgent pointer: 0 Options: (12 bytes), Maximum segment size, No-Operation (NOP), Window scale, No-Operation (NOP), No-Operation (NOP), SACK permitted [SEQ/ACK analysis] [iRTT: 0.000018000 seconds] [TCP Analysis Flags] [Expert Info (Note/Sequence): This frame is a (suspected) spurious retransmission] [This frame is a (suspected) spurious retransmission] [Severity level: Note] [Group: Sequence] [Expert Info (Note/Sequence): This frame is a (suspected) retransmission] [This frame is a (suspected) retransmission] [Severity level: Note] [Group: Sequence] Anyone have any ideas what might be the issue here? I can post more info if need be.
SharePoint Server Farm F5 LoadBalancer with SSL
Hi All, First off i should let you know that i am not managing the F5, I am posting here to maybe find out if error is caused from f5 config, if so steer the customer to fix their f5 config with regards to specific sharepoint settings. I have a 2x2 MinRole HA SharePoint Server Farm. 2 App servers, 2 WFE servers. I have had the customer set up F5 LoadBalancer with SSL being handled with F5. I have setup my alternate access mapping as follows. public url is the dns set up for f5. and in internal urls i have added http/s version of app server, and the two web servers. https://i.hizliresim.com/CiSVLD.png As for problems I have faced, I found out when i want to pick a date from calendar the widget is not loaded from server. It throws a x-frame set to deny error. https://i.hizliresim.com/ezYNAZ.png One other problem i found out is that workflows dont work and throw an ssl connection can not be established error. https://i.hizliresim.com/Djt61R.png How should the customer set up f5 load balancing with ssl handled in f5? Thanks in advance.Webpage errors after using offloading
Hello! I have a virtual server listening on 80 and serving nodes at 80. no we added offloading on a new https virtual server and iRule on the old one to redirect (am using the default iRule for redirection) and we have an error when we try to access the page: Mixed Content: The page at '' was loaded over HTTPS, but requested an insecure stylesheet ''. This request has been blocked; the content must be served over HTTPS. Mixed Content: The page at '' was loaded over HTTPS, but requested an insecure script ''. This request has been blocked; the content must be served over HTTPS. So the page is not viewed correctly on HTTPS and not functional. How can i fix this problem from F5 ?