HTTPS Virtual Servers on 8000/8011 not working

Hello everyone!

I am having an issue I am hoping to get some help with.

Setup:

1 HTTPS Virtual Server with IP a.a.a.a port 443 doing SSL offloading to b.b.b.b on port 80. Site A Working! 1 HTTPS Virtual Server with IP a.a.a.a port 8000 doing SSL offloading to b.b.b.b on port 8000. Site B not working. 1 HTTPS Virtual Server with IP a.a.a.a port 8011 doing SSL offloading to b.b.b.b on port 8011. Site C not working.

I have deployed all 3 with the F5 HTTP iApp. I am seeing no traffic to my pools for site B and C.

I am getting this from both sites B and C in a tcp dump:

Transmission Control Protocol, Src Port: 65265, Dst Port: 8011, Seq: 0, Len: 0
    Source Port: 65265
    Destination Port: 8011
    [Stream index: 0]
    [TCP Segment Len: 0]
    Sequence number: 0    (relative sequence number)
    Acknowledgment number: 0
    Header Length: 32 bytes
    Flags: 0x002 (SYN)
        000. .... .... = Reserved: Not set
        ...0 .... .... = Nonce: Not set
        .... 0... .... = Congestion Window Reduced (CWR): Not set
        .... .0.. .... = ECN-Echo: Not set
        .... ..0. .... = Urgent: Not set
        .... ...0 .... = Acknowledgment: Not set
        .... .... 0... = Push: Not set
        .... .... .0.. = Reset: Not set
        .... .... ..1. = Syn: Set
            [Expert Info (Chat/Sequence): Connection establish request (SYN): server port 8011]
                [Connection establish request (SYN): server port 8011]
                [Severity level: Chat]
                [Group: Sequence]
        .... .... ...0 = Fin: Not set
        [TCP Flags: ··········S·]
    Window size value: 8192
    [Calculated window size: 8192]
    Checksum: 0x66c3 [unverified]
    [Checksum Status: Unverified]
    Urgent pointer: 0
    Options: (12 bytes), Maximum segment size, No-Operation (NOP), Window scale, No-Operation (NOP), No-Operation (NOP), SACK permitted
    [SEQ/ACK analysis]
        [iRTT: 0.000018000 seconds]
        [TCP Analysis Flags]
            [Expert Info (Note/Sequence): This frame is a (suspected) spurious retransmission]
                [This frame is a (suspected) spurious retransmission]
                [Severity level: Note]
                [Group: Sequence]
            [Expert Info (Note/Sequence): This frame is a (suspected) retransmission]
                [This frame is a (suspected) retransmission]
                [Severity level: Note]
                [Group: Sequence]

Anyone have any ideas what might be the issue here? I can post more info if need be.