How to do Port forwarding from 443 to 80 ?
My VIP is enabled with HTTPS and running on 443 and i have pool configured with 80. My underlying JBoss is configured with 8080. When I hit the VIP with HTTPS , it does not reach any of the pool instances which are HTTPD instances. At the same time, when i configure VIP with HTTP:80 it works perfectly. Kindly help to me to understand the problem and explain the solution
Requested URL was rejected
Recently I began to get the message "The requested URL was rejected" when trying to reach some very innocent websites (restaurant, conservation group) that I had gone to many times. I deleted my cookies but it was of no help. Has been going on for a month. Also happens on my wife's laptop. I use chrome and she uses IE.Importing WebInspect vulnerabilities into ASM
The literature indicates that 11.4 can import vulnerability definitions from WebInspect, but I've been unable to find any details about how that works. Can someone please point me at instructions for exporting vulnerabilities from WI and importing them into the ASM?
APM access policy default logout URI override based on landing URI?
Hi, we have currently an APM access policy that splits in different branches, based on the landing URI. All works fine, but when we log out, the default behavior is to redirect the client for any further new sessions back to root (/). I know that this can be customized under Access Policy -> Customization, but then it's valid for the entire access profile. We would like to reuse the initial landing URI, so that each application can be relaunched again after logout, with the original landing URI that was previously entered. I don't find any setting in VPE (maybe this logout URI can be overridden by the landing URI by passing a parameter), or does anyone has any experience in doing this with either policies, either iRules? An example would be appreciated :)
F5 BIG-IP Edge Client - Firewall Check Failed
Hi all. I'am new here and I don't know almost nothing about F5. But I have to support F5 BIG-IP Edge Client. And from time to time we have the following problem: When the user tries to connect they get the message "Firewall check failed. Please activate Windows Firewall and try again." But that problem have only 3-5 users. Mostly after the Windows Updates. We tried a few things: Uninstall and install the BIG-IP Software Checked the Windows firewall were on, also the rules With diffrent user on the same client And a lot of other things I cant remember nothing helped. So we have to install a new Windows on the machine, which can not be the solution. Maybe anyone of you had the same problem. I hope you can help me. We use Windows 7 x64 Notebooks. BIG-IP Edge Client Version is 7101,2014,1106,1707. Thanks
URL Forwarding and Masking
Our current requirement is that if a user clicks on external link from our website - the URL should not be changed and the content should be loaded from an external link. Following are the use cases to understand more about this [1] User is logged in to our website https://example-test.com [2] User clicked on external link https://external-link-website.com [3] User should not see that URL is changed to but instead it should show as https://example-test.com and content should be loaded from https://external-link-website.com Can you please provide us an iRule or suggestions to achieve this requirement for us? Thanks Srikanth
Why is my F5 dropping telnet on port 25 for one network?
I have configured SMTP on my LTM (11.4.1) and have configured a SNAT of 10.229.104.37 so all connections from the LTM are sent with this address and I have no iRule configured. If telnet 10.229.103.37 25 is sent from addresses in 10.229.0.0 network the connection is passed through to the single SMTP server. This is also confirmed by the tcpdump output. However, if I send the same telnet request from an external subnet the F5 drops the connection. As for the tcpdump I only see incoming request to the VIP. Can anyone help?Connection Refused
Hello, Now that I have my code working, it is time to pin down a connection refused/timeout problem I run into. As long as I have recently logged into the LTM management GUI, my iContol API calls connect flawlessly. If however X amount of time has passed, then my API calls are refused until I once again log into the LTM management GUI. Does anyone have an idea what is going on behind the scenes? One more bit of information, I am using the admin user and password for my API call connections. Should I be using some other user? Regards, Mark
Automation of VIP configuration
Hi Experts, We usually deploy 100s of VIPs on 100s of F5 LTM boxes regularly but manually. This takes about 3-4 hrs on each box. Am looking to automate that configuration. Hve no idea about any scripting language or anything. Can any expert guide how this can best be done via automation and time reduced to less than an 1hr. thanks -genseek