gtm
36 TopicsDNS Express and Zone Transfers
This is the third in a series of DNS articles that I'm writing. The first two are: Let's Talk DNS on DevCentral DNS The F5 Way: A Paradigm Shift DNS Express is a relatively new feature (showed up in v11.1), and it's one of the more powerful features offered by the BIG-IP. DNS Express allows you to transfer DNS zones from your current infrastructure to the BIG-IP. The BIG-IP can then answer requests for those zones...and do it at blazingly fast speeds! Another benefit of DNS Express is that it doesn't run full BIND, so it's not as vulnerable as a typical BIND infrastructure. Related note: as of the date of this article, BIND alone had 71 different CVE vulnerabilities (41 of those were DoS-specific). With all this greatness at our fingertips, I want to show you how to provision the Global Traffic Manager (GTM), create a zone, configure DNS Express, and show a successful zone transfer. I'll be using BIND from the GTM as the Master server (disclaimer: I'm doing this in my virtual lab setup, but you wouldn't normally do this in a production environment). Provision GTM First, navigate to System >> Resource Provisioning and check the box for Global Traffic (GTM). Make sure that this module is licensed (keep in mind that you will have to restart your BIG-IP once you provision GTM). See the screenshot below for details. If GTM is not licensed, then talk to your Sales Engineer. By the way, you can take advantage of our new Good, Better, Best licensing model and save yourself time and money. If you get the "Best" option, then you basically get all the modules F5 has to offer! Create a Listener Once GTM is provisioned, it's time to create a listener for the DNS requests (navigate to Global Traffic >> Listeners). I used the address from my external VLAN as the listener address, but in a production environment you would choose a different listener address. When creating a Listener, you need to choose a DNS Profile that has DNS Express enabled. I verified that DNS Express was enabled on the profile listed below (dns). You can enable/disable options like IPv6 to IPv4 translation, DNS Express, DNSSEC, etc in the DNS profile. So, make sure you configure your DNS profile correctly prior to selecting it when creating a Listener. Configure ZoneRunner Now that the listener is created and configured, you can use the ZoneRunner utility to manage your DNS zones and resource records. You can do several things with ZoneRunner including: configuring a zone configuring the resource records that make up that zone configure a view for access control configure options in the named.conf file I created a master zone and named it "dnstest.com" and then configured the SOA Record and NS Record details (TTL values, server names, etc). I also created two A records (www.dnstest.com and ftp.dnstest.com) and associated IP addresses with each. You can see the details of the zone in the screenshot below: After I created the zone, I configured the Named Configuration file to allow for zone transfer from the local host. You can view/modify the named.conf file directly from the GUI by navigating to Global Traffic >> ZoneRunner >> Named Configuration. The named configuration file will also automatically update as you make changes in the other areas of the ZoneRunner utility, so you don't always have to configure it directly. In my case, I simply viewed the file to ensure the "allow-transfer localhost" was there...and it was! This entry was required for the BIND server to transfer the zone information for dnstest.com to the DNS Express module. In my lab setup, I used BIND from GTM as the Master server, but in a production environment, the Master BIND server would probably reside on an external server. In a typical setup where you host zones external to the BIG-IP, you would have to add the following code to the zone file. In my case, I didn't have to add this code because I set up everything on the BIG-IP. zone "dnstest.com" { type master; file "var/lib/bind/dnstest.com.hosts"; also-notify {1.1.1.1;}; //where 1.1.1.1 is the listener address allow-transfer {1.1.1.2;}; //where 1.1.1.2 is the self IP }; DNS Express DNS Express provides the ability for a BIG-IP to act as a high speed, authoritative secondary DNS server. This allows the BIG-IP to perform zone transfers from multiple primary DNS servers that are responsible for different zones, perform a zone transfer from the local BIND server on the BIG-IP, and serve DNS records faster than the primary DNS servers and the local BIND server. To use DNS Express, you need to create a DNS Express zone. Then, you can transfer zone records from the local BIND server or back-end DNS servers to DNS Express. In order to set up a DNS Express Zone, navigate to Local Traffic >> DNS Express Zones >> DNS Express Zone List and create a new zone. Note that DNS Express is configured under "Local Traffic" as part of the Local Traffic Manager (LTM). The best practice is to use the name that appears at the apex of a BIND zone file (in my case, dnstest.com). The name must begin with a letter and can contain only letters, numbers, and the underscore character (it doesn't have to contain each of these, but it can't contain anything other than these characters). The Target IP Address is for the DNS server from which you want to transfer records. In my setup, I used the default value (127.0.0.1) which is for the BIND server on the BIG-IP. The Notify Action setting of "consume" means that NOTIFY queries are only seen by DNS Express...you can think of it like DNS Express "consumes" all the NOTIFY queries and the backend DNS resources never have to handle them. This is the default setting...and it's awesome! The Test... After everything had been configured, the zone records should have been transferred to DNS Express. In order to test this, I used the "dnsxdump" command from the CLI to verify that all the records were in the DNS Express database. As you can see in the screenshot below, all the records transferred correctly! In addition, I checked out /var/log/ltm to look for the zone transfer message. As you can see in the screenshot below, the zone transfer (AXFR Transfer of zone dnstest.com) succeeded! Now that you know how to configure DNS Express, you have no reason to not use it...so get out there, get it configured, and let the BIG-IP provide you with the best DNS performance you've ever experienced! I also created a quick video showing how to do all the things I just wrote about in this article (provision GTM, create a listener, create a zone, etc). So, if you're more of a "hands-on, visual learner" check out the video...it's located here: https://devcentral.f5.com/s/videos/dns-express-and-zone-transfers Well, that wraps it up for this article. I'll be back soon with more BIG-IP and GTM articles, so check back often!8.7KViews0likes13CommentsReplacing a DNS Server with F5 BIG-IP DNS
First things first, you have decided to deploy F5 BIG-IP DNS to replace a BIND server after receiving notifications from your information assurance officer or your friendly LinkedIn community that additional CVE's have been identified for the version of BIND you are running. In this particular instance you already have a BIG-IP in your DMZ acting as your reverse proxy. You have purchased the best bundle though have only deployed what you know, APM and LTM (common scenario). After upgrading to version 13 after its release in February 2017 and then determining the latest hotfix using https://support.f5.com/csp/article/K9502, you navigate within the TMUI to System > Resource Provisioning and simply provision DNS. Once complete you will need to configure your existing BIND server to allow zone transfers to the BIG-IP. In this case, we will define a self-IP on the BIG-IP. Without the BIG-IP Self IP Defined "allow-transfer { localhost;};" With the BIG-IP Self IP Defined "allow-transfer { localhost; 10.10.10.2;};" Once you have allowed the zone transfer, you will create the zone on the BIG-IP and perform the zone transfer. On the Main tab, click DNS > Zones > ZoneRunner > Zone List . The Zone List screen opens. Click Create.The New Zone screen opens. From the View Name list, select the view that you want this zone to be a member of. Note: The default view is external. In the Zone Name field, type a name for the zone file in this format, including the trailing dot: db.[viewname].[zonename]. For example, db.external.lyons.demo.com. From the Zone Type list, select Master. From the Records Creation Method list, select Transfer from Server. Within Options, include the following allow-update { localhost;}; allow-transfer { localhost; }; also-notify { ::1 port 5353; }; In the Records Creation area, type the values for the SOA and NS record parameters. Click Finished Ok, so you might be asking yourself right about now, "I thought ZoneRunner was a BIND instance?" In this scenario you are correct which is why we are going to slave from on-box BIND to ensure BIND is never accessible externally and we only respond to DNS queries using DNSExpress. Now can you slave from an off-box DNSExpress instance, of course though that is outside the scope of this article. Prior to creating our DNS profile and listeners, we are going to configure DNS logging. For this use case, we are going to configure logging to the on-box syslog instance. In the GUI, navigate to: System > Logs > Configuration > Log Publishers: Create Create a new DNS Log Publisher using the defaults unless defined below. Name: dns-local-syslog Destinations: Move local-syslog to the Selected column In the GUI, navigate to: DNS > Delivery > Profiles > Other > DNS Logging: Create Create a new DNS Profile using the defaults unless defined below. Name: dns-logging Log Publisher: Select dns-local-syslog Log Responses: Enabled Include Query ID: Enabled Note: For the purposes of this article, we are going to enable all DNS logging options. Now that we have logging set up to use by our DNS profile, we are going to going ahead and create that object. In the GUI, navigate to: DNS > Delivery > Profiles > DNS: Create Create a new DNS profile as shown in the table below. Keep the defaults if not noted in the table. Name: AuthoritativeNS Unhandled Query Action: Drop Use BIND Server on Big-IP: Disabled Logging: Enabled Logging Profile: dns-logging Now that we have created our DNS profile, we are going create our DNS listeners. Remember, F5 is a default deny device so without creating something to listen on all attempts to connect to or query the BIG-IP will be denied. We are going to create external Listeners that will be our target IP address when querying BIG-IP DNS. In the GUI, navigate to: DNS > Delivery > Listeners > Listener List: Create Create a two new listeners using the defaults unless defined below. Name: external-listener-UDP Destination: Host: 10.1.100.53 VLAN Traffic: Enabled on.. VLANs and Tunnels: external DNS Profile: AuthoritativeNS Name: external-listener-TCP Destination: Host: 10.1.100.53 VLAN Traffic: Enabled on.. VLANs and Tunnels: external Protocol: TCP DNS Profile: AuthoritativeNS So up to this point we have configured your legacy DNS server to perform a DNS transfer with the BIG-IP, created a zone within ZoneRunner, performed the zone transfer from your legacy DNS device, created a DNS profile and listeners on the BIG-IP. Ok, bear with me we are almost done. Our next step is configuring the local device as a name server and then create a DNSExpress zone that you will be performing a zone transfer to using the on-box BIND instance. So let's begin. In the GUI, navigate to: DNS > Delivery > Nameservers > Nameserver List: Create In this case we will simply provide a Name and leave all other defaults. Name: BIG-IP1 Select Finish In the GUI, navigate to: DNS > Zones > Zones > Zone List: Create Name: lyons.demo.com Server: BIG-IP1 Notify Action: Consume Verify Notify TSIG: Uncheck Zone Transfer Clients: Move BIG-IP1 from Available to Active Select Finish In the GUI, navigate to: DNS > Zones > Zones > Zone List: Create Name: 198.199.10.in-addr.arpa Server: BIG-IP1 Notify Action: Consume Verify Notify TSIG: Uncheck Zone Transfer Clients: Move BIG-IP1 from Available to Active Select Finish Now, our final step...validation. From the cli, simply run a dnsxdump to ensure records have been transferred to DNSExpress as shown below. If you would like to see zone transfers in actions, simply create a resource record within ZoneRunner and run a tail -f on the /var/log/ltm. You are now complete and have a fully functional authoritative DNS server for your organization without the vulnerabilities of BIND or in an effort to simply consolidate services. If you have any problems at all, please don't ever hesitate to reach out directly. Now my answer may be contact support though I have no problem walking through a scenario or troubleshooting attempt with you. Reference Documentation https://support.f5.com/kb/en-us/products/big-ip-dns/manuals/product/bigip-dns-implementations-13-0-0/6.html https://support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/bigip-dns-services-implementations-13-0-0/1.html3.8KViews0likes48CommentsThe BIG-IP GTM: Configuring DNSSEC
This is the fourth in a series of DNS articles that I'm writing. The first three are: Let's Talk DNS on DevCentral DNS The F5 Way: A Paradigm Shift DNS Express and Zone Transfers The Domain Name System (DNS) is a key component of the Internet's critical infrastructure. So, if the foundation of the Internet itself relies on DNS, then let's take a quick look at how stable this foundation really is. After all, DNS was born in the early 1980s...back when REO Speedwagon and Air Supply were cranking out hits on the radio. The question is...does the DNS of the 1980s have any issues we need to worry about today? Well as it turns out, DNS was not initially built with security in mind. When a user types a web address in his browser, he expects to be reliably directed to that website. Unfortunately, that doesn't always happen. One common example is seen when an attacker disrupts the user's request and redirects to a malicious site. Several DNS vulnerabilities like this have led the way to an interest in DNS Security Extensions (DNSSEC) to secure this critical part of our Internet infrastructure. What is DNSSEC? DNSSEC is a suite of extensions that add security to the DNS protocol by enabling responses to be validated. With DNSSEC, the DNS protocol is much less susceptible to certain types of attacks (like the DNS spoofing situation described above). DNSSEC uses digital signatures to validate DNS responses so that the end user can be assured he is visiting the correct website. Based on the design features of DNSSEC, it is most effective when deployed at each step in the DNS lookup process...from root zone to the final domain name. If you leave any of the steps unsigned, it creates weakness in the process and you won't be able to trust the entire chain. Keep in mind that DNSSEC doesn't encrypt the data, it just signs it to attest to the validity of the response. When a user requests a site, DNS kicks into gear by translating the domain name into an IP address. It does this through a series of recursive lookups that form a "chain" of requests. The picture below shows an example of a user requesting f5.com and the DNS system chaining together requests in order to match the domain name to the IP address so that he can access the website. This is all well and good, but the issue that forms the need for DNSSEC is that each stop in this chain inherently trusts the other parts of the chain...no questions asked. So, what if an attacker could somehow manipulate one of the servers (or even the traffic on the wire) and send the wrong IP address back to the user? The attacker could redirect the user to a website where malware is waiting to scan the unsuspecting user's computer. The picture below shows the same chain of requests, but this time an attacker has manipulated the last response so that the incorrect IP address is returned to the user. Not good. DNSSEC addresses this problem by validating the response of each part of the chain by using digital signatures. These signatures help build a "chain of trust" that DNS can rely on when answering requests. To form the chain of trust, DNSSEC starts with a "trust anchor" and everything below that trust anchor is trusted. Ideally, the trust anchor is the root zone. Fortunately for all of us, ICANN published the root zone trust anchor, and root operators began serving the signed root zone in July, 2010. With the root zone signed, all other zones below it can also be signed, thus forming a solid and complete chain of trust. In fact, ICANN also lists the Top Level Domains (TLD) that are currently signed and have trust anchors published as DS records in the root zone (most of the TLDs are signed). The following picture (taken from iiw.idcommons.net) shows the process for building the chain of trust from the root zone. DNSSEC uses two kinds of keys: Key Signing Keys and Zone Signing Keys. The Key Signing Key is used to sign other keys in order to build the chain of trust. This key is sometimes cryptographically stronger and has a longer lifespan than a Zone Signing Key. The Zone Signing Key is used to sign the data that is published in a zone. DNSSEC uses the Key Signing Keys and Zone Signing Keys to sign and verify records within DNS. BIG-IP Configuration The BIG-IP Global Traffic Manager (GTM) will not only respond to DNS requests, but it will also sign DNSSEC validated responses. But before you can configure the GTM to handle nameserver responses that are DNSSEC-compliant, you have to create DNSSEC keys and zones. The first step is to create the Zone Signing Key(s) and the Key Signing Key(s). The Zone Signing Key specifies the keys that the system uses to sign requests to a zone. The BIG-IP responds to DNSSEC requests to a specific zone by returning signed nameserver responses based on the currently available generations of a key. The Key Signing Key works the same as the Zone Signing Key except that it applies to keys instead of zones. To create these keys, navigate to Global Traffic >> DNSSEC Key List and create a new key. Note: this menu looks slightly different starting in version 11.5 (it's listed under "DNS" instead of "Global Traffic") but the Key Creation is still the same. On this page, you can create a Zone Signing Key and a Key Signing Key, and you can also specify several other settings like HSM use, algorithm selection, and key management action. Note that you can let the BIG-IP automatically manage your key actions or you can choose to do it manually. Configuration Settings The Bit Width for the key can be either 1024, 2048, or 4096 bits. The default is 1024. The TTL value specifies the length of time the BIG-IP stores the key in cache. A key can be cached between 0 and 4294967295 seconds (by the way, 4294967295 seconds is a little more than 136 years!). The default value is 86400 seconds (one day). This value must be less than the difference between the values of the rollover period and expiration period (referred to as the "overlap period"). Setting this value to 0 seconds indicates that client resolvers do not cache the key. The Rollover Period specifies the interval after which the BIG-IP creates a new generation of an existing key. The valid range for values for the Rollover Period is from 0 to 4294967295 seconds. The default is 0 seconds, which means the key does not roll over. This value of the rollover period must be greater than or equal to one third of the value of the expiration period and less than the value of the expiration period. The Expiration Period specifies the interval after which the BIG-IP deletes an existing key. The valid range for values is from 0 to 4294967295 seconds. The default is 0 seconds, which means the key does not expire. The value of the expiration period must be more than the value of the rollover period. Also, the overlap period must be more than the value of the TTL. FYI...the National Institute of Standards and Technology (NIST) recommends that a Zone Signing Key expire between 30-90 days, and that a Key Signing Key expire once a year. The Signature Validity Period specifies the interval after which the BIG-IP no longer uses the expired signature. The valid range for values is from 0 to 4294967295 seconds. The default is 7 days. This value must be greater than the value of the signature publication period. If you set this value to 0, the server verifying the signature never succeeds because the signature is always expired, so don't set it to 0! The Signature Publication Period specifies the interval after which the BIG-IP creates a new signature. The valid range for these values is from 0 to 4294967295 seconds. The default value is 4 days, 16 hours (two-thirds of a week). This value must be less than the value of the signature validity period. If you set this value to 0, the system does not cache the signature. TTL Values, Key Values, and Overlaps The following diagram shows an example of key generation timelines with rollover periods and overlaps. This diagram is useful when reviewing the configuration settings and values discussed in the section above. Notice that the expiration period must be greater than the rollover period, and the TTL must be less than the overlap period. You wouldn't want a key to expire before it rolls over; likewise, you wouldn't want a TTL period to outlast the overlap period...if it did, the key could still be valid after the expiration period. After you create and configure the Zone Signing Key(s) and Key Signing Key(s), the next step is to create a DNSSEC zone. A DNSSEC zone maps a domain name to a set of DNSSEC keys. In the BIG-IP, you create DNSSEC zones by navigating to Global Traffic >> DNSSEC Zone List and create a new zone. On this page, you can name the zone, configure state settings, assign algorithms, and activate zone keys. The hash algorithm options are SHA-1 (default) or SHA-256. The Zone Signing Key box specifies the zone keys that the BIG-IP uses to sign requests to a zone. The Key Signing Key works similar to the Zone Signing Key, except it is used to sign keys instead of requests. The following screenshot shows the options available for creating DNSSEC zones. To fully secure a zone, the parent zone needs to have copies of the child's public key. The parent zone then signs the child's public key with their own key and sends it up to their parent...this pattern is followed all the way to the root zone. Once you have created the DNSSEC keys and zones, you can submit the Delegation Signer (DS) record to the administrators of your parent zone. They will sign the DS record with their own key and upload it to their zone. You can find the DS record for your zone here: /config/gtm/dsset-dnssec.zone.name There's a lot to DNSSEC, and this article wasn't written to capture it all, but I hope it sheds a little light on what DNSSEC is and how you can create zones and keys on your BIG-IP. Stay tuned for more BIG-IP GTM articles in the coming days, weeks, and months. Until then, keep those DNS requests flowing, and make sure they are valid with DNSSEC! One last thing...did you know that F5 has an awesome Reference Architecture dedicated to Intelligent DNS Scale? The F5 Intelligent DNS Scale solution ensures that you can access your critical web, application, and database services whenever you need them...check it out!3.8KViews0likes5CommentsDNS Caching
I've been writing some DNS articles over the past couple of months, and I wanted to keep the momentum going with a discussion on DNS Caching. As a reminder, my first five articles are: Let's Talk DNS on DevCentral DNS The F5 Way: A Paradigm Shift DNS Express and Zone Transfers The BIG-IP GTM: Configuring DNSSEC DNS on the BIG-IP: IPv6 to IPv4 Translation We all know that caching improves response time and allows for a better user experience, and the good news is that the BIG-IP is the best in the business when it comes to caching DNS requests. When a user requests access to a website, it's obviously faster if the DNS response comes directly from the cache on a nearby machine rather than waiting for a recursive lookup process that spans multiple servers. The BIG-IP is specifically designed to quickly and efficiently respond to DNS requests directly from cache. This cuts down on administrative overhead and provides a better and faster experience for your users. There are three different types of DNS caches on the BIG-IP: Transparent, Resolver, and Validating Resolver. In order to create a new cache, navigate to DNS >> Caches >> Cache List and create a new cache (I'm using v11.5). Let's check out the details of each one! Transparent Resolver When the BIG-IP is configured with a transparent cache, it uses external DNS resolvers to resolve DNS queries and then cache the responses from the resolvers. Then, the next time the BIG-IP receives a query for a response that exists in cache, it immediately returns the response to the user. Transparent cache responses contain messages and resource records. The diagram below shows a transparent cache scenario where the BIG-IP does not yet have the response to a DNS query in its cache. In this example, the user sends a DNS query, but because the BIG-IP does not have a response cached, it transparently forwards the query to the appropriate external DNS resolver. When the BIG-IP receives the response from the resolver, it caches the response for future queries. A big benefit of transparent caching is that it consolidates content that would otherwise be cached across many different external resolvers. This consolidated cache approach produces a much higher cache hit percentage for your users. The following screenshot shows the configuration options for setting up a transparent cache. Notice that when you select the "Transparent" Resolver Type, you simply configure a few DNS Cache settings and you're done! The Message Cache Size (listed in bytes) is the maximum size of the message cache, and the Resource Record Cache Size (also listed in bytes) is the maximum size of the resource record cache. Pretty straightforward stuff. The "Answer Default Zones" setting is not enabled by default; meaning, it will pass along DNS queries for the default zones. When enabled, the BIG-IP will answer DNS queries for the following default zones: localhost, reverse 127.0.0.1 and ::1, and AS112. The "Add DNSSEC OK Bit On Miss" setting is enabled by default., and simply means that the BIG-IP will add the DNSSEC OK bit when it forwards DNS queries. Adding this bit indicates to the server that the resolver is able to accept DNSSEC security resource records. Resolver Whereas the Transparent cache will forward the DNS query to an external resolver, the "Resolver" cache will actually resolve the DNS queries and cache the responses. The Resolver cache contains messages, resource records, and the nameservers that the BIG-IP queries to resolve DNS queries. The screenshot below shows the configuration options for setting up a Resolver cache. When you select the Resolver cache, you will need to select a Route Domain Name from the dropdown list. This specifies the route domain that the resolver uses for outbound traffic. The Message Cache Size and Resource Record Cache Size are the same settings as in Transparent cache. The Name Server Cache Count (listed in entries) is the maximum number of DNS nameservers on which the BIG-IP will cache connection and capability data. The Answer Default Zones is the same setting as described above for the Transparent cache. As expected, the Resolver cache has several DNS Resolver settings. The "Use IPv4, IPv6, UDP, and TCP" checkboxes are fairly straightforward. They are all enabled by default, and they simply specify whether the BIG-IP will answer and issue queries in those specific formats. The "Max Concurrent UDP and TCP Flows" specifies the maximum number of concurrent sessions the BIG-IP supports. The "Max Concurrent Queries" is similar in that it specifies the maximum number of concurrent queries used by the resolver. The "Unsolicited Reply Threshold" specifies the number of replies to DNS queries the BIG-IP will support before generating an SNMP trap and log message as an alert to a potential attack. DNS cache poisoning and other Denial of Service attacks will sometimes use unsolicited replies as part of their attack vectors. The "Allowed Query Time" is listed in milliseconds and specifies the time the BIG-IP will allow a query to remain in the queue before replacing it with a new query when the number of concurrent distinct queries exceeds the limit listed in the "Max Concurrent Queries" setting (discussed above). The "Randomize Query Character Case" is enabled by default and will force the BIG-IP to randomize the character case (upper/lower) in domain name queries issued to the root DNS servers. Finally, the "Root Hints" setting specifies the host information needed to resolve names outside the authoritative DNS domains. Simply input IP addresses of the root DNS servers and hit the "add" button. Validating Resolver The Validating Resolver cache takes things to the next level by recursively querying public DNS servers and validating the identity of the responding server before caching the response. The Validating Resolver uses DNSSEC to validate the responses (which mitigates DNS attacks like cache poisoning). For more on DNSSEC, you can check out my previous article. The Validating Resolver cache contains messages, resource records, the nameservers that the BIG-IP queries to resolve DNS queries, and DNSSEC keys. When an authoritative server signs a DNS response, the Validating Resolver will verify the data prior to storing it in cache. The Validating Resolver cache also includes a built-in filter and detection mechanism that rejects unsolicited DNS responses. The screenshot below shows the configuration options for setting up a Validating Resolver cache. I won't go into detail on all the settings for this page because most of them are identical to the Validating Resolver cache. However, as you would expect, there are a few extra options in the Validating Resolver cache. The first is found in the DNS Cache settings where you will find the "DNSSEC Key Cache Size". This setting specifies the maximum size (in bytes) of the DNSKEY cache. The DNS Resolver settings are identical to the Resolver cache. The only other difference is found in the DNSSEC Validator settings. The "Prefetch Key" is enabled by default and it specifies that the BIG-IP will fetch the DNSKEY early in the validation process. You can disable this setting if you want to reduce the amount of resolver traffic, but also understand that, if disabled, a client might have to wait for the validating resolver to perform a key lookup (which will take some time). The "Ignore Checking Disabled Bit" is disabled by default. If you enable this setting, the BIG-IP will ignore the Checking Disabled setting on client queries and will perform response validation and only return secure answers. Keep in mind that caching is a great tool to use, but it's also good to know how much space you are willing to allocate for caching. If you allocate too much, you might serve up outdated responses, but if you allocate too little, you will force your users to wait while DNS recursively asks a bunch of servers for information you could have been holding all along. In the end, it's a reminder that you should know how often your application data changes, and you should configure these caching values accordingly. Well, that does it for this edition of DNS caching...stay tuned for more DNS goodness in future articles!2.2KViews1like3CommentsDNS Interception: Protecting the Client
Introduction Everything starts with a DNS request. So why not use it to protect the client? With the recent addition of Secure Web Gateway Services to the F5 line up of modules in TMOS 11.5, it provided the ability to access a URL Categorization database via iRules that contains 150 URL categories and identifies over 60 million URLs. Pair that with the IP Intelligence Services that was introduced in TMOS 11.2 and some DNS iRules, you now have a solution to filter all DNS Requests and Reponses originating from your network. This simple but powerful tool gives you the ability to protect clients which you may not have control over by sending back a Non-Existent Domain in the response to prevent the client from connecting to the malicious server or undesirable content. This iRule solution is applied to a DNS resolver or a catch all (0.0.0.0/0:53) DNS virtual server where the BIG-IP is a default gateway. It allows the BIG-IP to explicitly or transparently intercept all DNS Requests and Responses from the client and apply security filtering controls. This solution is suited to almost any outbound DNS scenario where you need to protect the client from accessing malicious threats or undesirable content intentionally or unintentionally. One example where you may find this solution handy, is on a Guest or BYOD network where you need a transparent method of adding security when you don’t have control of the client. How the solution works Scenario 1: The BIG-IP is configured as a DNS resolver and the client’s DNS settings have been configured via DHCP with the IP of the BIG-IP as the LDNS. Scenario 2: The BIG-IP is a default gateway on the network and a catch all (0.0.0.0/0:53) DNS virtual server transparently intercepts all DNS Requests an Responses. The client’s DNS settings have been configured via DHCP with the IP of a LDNS that has to traverse the BIG-IP. Scenario 3: The BIG-IP is a default gateway on the network and a catch all (0.0.0.0/0:53) DNS virtual server transparently intercepts all DNS Requests an Responses. The client’s DNS settings have been configured via DHCP or manually with a public DNS service (e.g Google, Open DNS, etc.) an the client has to traverse the BIG-IP. The “client” in the above scenarios doesn’t have to be an end user device such as a tablet, it could be a forward proxy server for example. The iRule is applied to the virtual server (VS) with a DNS profile and the events DNS_REQUEST and DNS_RESPONSE are triggered. When the DNS_REQUEST is triggered, the DNS Question Name is passed to the URL Categorization database using CATEGORY::lookup. When the DNS_RESPONSE is triggered, the IP address in the DNS Response can be passed to IP Intelligence database using IP::reputation. Solution Features DNS Request Filtering configurable items: DNS Request Filtering - Enable or Disable all DNS_REQUEST filtering. URL Categories e.g. Adult_Content, Hacking. If the DNS Question (FQDN - e.g. playboy.com) matches a category in the data group (default: dns_request_url_categories_dg), NXDOMAIN will be returned in the response. DNS Question Type e.g. A, AAAA, ANY etc. Only the Question Types configured in the data group (default: dns_request_question_type_dg) will be filtered. FQDN/TLD Whitelist e.g. f5.com or .gov. Any FQDN/TLD in the whitelist data group (default: dns_request_fqdn_whitelist_dg) will bypass DNS_REQUEST filtering regardless of the Question Type or URL Category. DNS Response Filtering configurable items: DNS Response Filtering - Enable or Disable all DNS_RESPONSE filtering. IP/Subnet Whitelist e.g 192.168.0.0/16 or 1.1.1.1. Any IP or IP Subnet in the whitelist data group will bypass DNS_RESPONSE filtering. IPI Threat Categories e.g. Spam Sources, Phishing. If the DNS RDATA (A & AAAA only) matches a category in the data group, NXDOMAIN will be returned in the response. Global Parameters Logging Control - Off, Level 1 (NXDOMAIN and Whitelist Matching) and Level 2 (All DNS Requests & Responses) Requirements - BIG-IP Version / Licensing BIG-IP 11.2+ for IPI Subscription (DNS Response filtering) BIG-IP 11.5+ for URL Categorization or SWG Subscription (DNS Request filtering) Licensing: GTM/DNS or DNS Services add-on to LTM URL Categorization Subscription or SWG Subscription for DNS Request filtering IPI Subscription for DNS Response filtering Configuration 1. Data Groups Multiple data groups are used throughout the solution to make it easy for the administrator to make changes on the fly without having to change the iRule. By default, the following data groups need to be created. The values can be modified to your liking. 1.1 Data Group Name: dns_request_url_categories_dg Purpose: URL Category Names If the DNS Question Name (e.g. playboy.com) matches a category (Adult_Content) in the data group, NXDOMAIN will be returned in the response. To obtain a list of possible URL Categories and their descriptions, run: tmsh list sys url-db url-category { description }. Example categories are included below. TMSH: create ltm data-group internal dns_request_url_categories_dg type string modify ltm data-group internal dns_request_url_categories_dg records add {"Adult_Content"} modify ltm data-group internal dns_request_url_categories_dg records add {"Advanced_Malware_Command_and_Control"} modify ltm data-group internal dns_request_url_categories_dg records add {"Advanced_Malware_Payloads"} modify ltm data-group internal dns_request_url_categories_dg records add {"Bot_Networks"} modify ltm data-group internal dns_request_url_categories_dg records add {"Compromised_Websites"} modify ltm data-group internal dns_request_url_categories_dg records add {"Elevated_Exposure"} modify ltm data-group internal dns_request_url_categories_dg records add {"Emerging_Exploits"} modify ltm data-group internal dns_request_url_categories_dg records add {"Hacking"} modify ltm data-group internal dns_request_url_categories_dg records add {"Keyloggers"} modify ltm data-group internal dns_request_url_categories_dg records add {"Malicious_Embedded_Link"} modify ltm data-group internal dns_request_url_categories_dg records add {"Malicious_Embedded_iFrame"} modify ltm data-group internal dns_request_url_categories_dg records add {"Malicious_Web_Sites"} modify ltm data-group internal dns_request_url_categories_dg records add {"Militancy_and_Extremist"} modify ltm data-group internal dns_request_url_categories_dg records add {"Mobile_Malware"} modify ltm data-group internal dns_request_url_categories_dg records add {"Newly_Registered_Websites"} modify ltm data-group internal dns_request_url_categories_dg records add {"Nudity"} modify ltm data-group internal dns_request_url_categories_dg records add {"Peer-to-Peer_File_Sharing"} modify ltm data-group internal dns_request_url_categories_dg records add {"Phishing_and_Other_Frauds"} modify ltm data-group internal dns_request_url_categories_dg records add {"Proxy_Avoidance"} modify ltm data-group internal dns_request_url_categories_dg records add {"Sex"} modify ltm data-group internal dns_request_url_categories_dg records add {"Spyware"} modify ltm data-group internal dns_request_url_categories_dg records add {"Tasteless"} modify ltm data-group internal dns_request_url_categories_dg records add {"Web_and_Email_Spam"} 1.2 Data Group Name: dns_request_question_type_dg Purpose: DNS Question Types Only the Question Types (e.g. A, AAAA) configured in the data group will be filtered. Example Question Types are included below. TMSH: create ltm data-group internal dns_request_question_type_dg type string modify ltm data-group internal dns_request_question_type_dg records add {"A"} modify ltm data-group internal dns_request_question_type_dg records add {"AAAA"} modify ltm data-group internal dns_request_question_type_dg records add {"ANY"} modify ltm data-group internal dns_request_question_type_dg records add {"CNAME"} modify ltm data-group internal dns_request_question_type_dg records add {"MX"} 1.3 Data Group Name: dns_request_fqdn_whitelist_dg Purpose: FQDN / TLD Whitelisting Any FQDN/TLD (e.g. f5.com or .gov) in the whitelist data group will bypass DNS_REQUEST filtering regardless of the Question Type or URL Category. Example Question Types are included below. TMSH: create ltm data-group internal dns_request_fqdn_whitelist_dg type string modify ltm data-group internal dns_request_fqdn_whitelist_dg records add {"f5.com"} 1.4 Data Group Name: dns_response_ip_whitelist_dg Purpose: IP / Subnet Whitelisting Any IP or IP Subnet in the whitelist data group will bypass DNS_RESPONSE filtering regardless of the IP Reputation. TMSH: create ltm data-group internal dns_response_ip_whitelist_dg type ip modify ltm data-group internal dns_response_ip_whitelist_dg records add {"10.0.0.0/8"} modify ltm data-group internal dns_response_ip_whitelist_dg records add {"172.16.0.0/12"} modify ltm data-group internal dns_response_ip_whitelist_dg records add {"192.168.0.0/16"} 1.5 Data Group Name: dns_response_ipi_categories_dg Purpose: IP Intelligence Category Names TMSH: create ltm data-group internal dns_response_ipi_categories_dg type string modify ltm data-group internal dns_response_ipi_categories_dg records add {"BotNets"} modify ltm data-group internal dns_response_ipi_categories_dg records add {"Networks"} modify ltm data-group internal dns_response_ipi_categories_dg records add {"Denial of Service"} modify ltm data-group internal dns_response_ipi_categories_dg records add {"Illegal"} modify ltm data-group internal dns_response_ipi_categories_dg records add {"Infected Sources"} modify ltm data-group internal dns_response_ipi_categories_dg records add {"Phishing"} modify ltm data-group internal dns_response_ipi_categories_dg records add {"Scanners"} modify ltm data-group internal dns_response_ipi_categories_dg records add {"Spam Sources"} modify ltm data-group internal dns_response_ipi_categories_dg records add {"Web Attacks"} modify ltm data-group internal dns_response_ipi_categories_dg records add {"Windows Exploits"} 2. iRule iRule Name: dns_request_response_filter_irule -> https://devcentral.f5.com/s/articles/dns-request-and-response-filtering-using-url-db-and-ipi-subscriptions The iRule is applied to the DNS resolver or a catch all (0.0.0.0/0:53) DNS virtual server. The logic is explained below and has been built to cater for most situations. Simply save the iRule to the BIG-IP using the Codeshare link above. DNS Request iRule logic: DNS Response iRule logic: 3. Virtual Servers, Pools, Nodes and DNS Profile 3.1 BIG-IP as a DNS Resolver (Scenario 1) When the BIG-IP is configured as a DNS Resolver, you need to configure a LDNS for the BIG-IP to resolve the requests. In my example I’m using Google’s public DNS servers. Make sure you change the Virtual Server IP and/or any other settings to suit your environment. TMSH: create ltm node google-public-dns-a { address 8.8.8.8 } create ltm node google-public-dns-b { address 8.8.4.4 } create ltm pool google_dns_pool { members replace-all-with { google-public-dns-a:domain google-public-dns-b:domain } } create ltm profile dns dns_interception { cache none defaults-from dns dns64 disabled dns-security none enable-cache no enable-dns-express no enable-dns-firewall no enable-dnssec no enable-gtm no enable-logging no process-rd yes process-xfr no unhandled-query-action allow use-local-bind no } create ltm virtual dns_resolver_udp_vs { destination 10.1.1.1:domain ip-protocol udp profiles replace-all-with { udp_gtm_dns dns_interception } source-address-translation { type automap } rules { dns_request_response_filter_irule } pool google_dns_pool } 3.2 BIG-IP is a default gateway (Scenario 2 and 3) When the BIG-IP is configured as a default GW, you only need to configure the catch all (0.0.0.0/0:53) DNS virtual server and the DNS Profile. Make sure you change the VLAN and/or any other settings to suit your environment. TMSH: create ltm profile dns dns_interception { cache none defaults-from dns dns64 disabled dns-security none enable-cache no enable-dns-express no enable-dns-firewall no enable-dnssec no enable-gtm no enable-logging no process-rd yes process-xfr no unhandled-query-action allow use-local-bind no } create ltm virtual catch_all_dns_udp_vs { destination 0.0.0.0:domain ip-protocol udp profiles replace-all-with { udp_gtm_dns dns_interception } vlans-enabled vlans replace-all-with { vlan1 } rules { dns_request_response_filter_irule } translate-address disabled } Conclusion By combining threat intelligence services with DNS, produces a simple and effective protection in a IoT world.1.3KViews0likes0CommentsDNS The F5 Way: A Paradigm Shift
This is the second in a series of DNS articles that I'm writing. The first is: Let's Talk DNS on DevCentral. Internet users rely heavily on DNS, and when DNS breaks, applications break. It's extremely important to implement an architecture that provides for DNS availability at all times. It's important because the number of Internet users continues to grow. In fact, a recent study conducted by the International Telecommunications Union claims that mobile devices will outnumber the people living on this planet at some point this year (2014). I'm certainly contributing to those stats as I have a smartphone and a tablet! In addition, the sophistication and complexity of websites are increasing. Many sites today require hundreds of DNS requests just to load a single page. So, when you combine the number of Internet users with the complexity of modern sites, you can imagine that the number of DNS requests traversing your network is extremely large. Verisign's average daily DNS query load during the fourth quarter of 2012 was 77 billion with a peak of 123 billion. Wow...that's a lot of DNS requests...every day! The point is this...Internet use is growing, and the need for reliable DNS is more important than ever. par·a·digm noun \ˈper-ə-ˌdīm\: a group of ideas about how something should be done, made, or thought about Conventional DNS design goes something like this... Front end (secondary) DNS servers are load balanced behind a firewall, and these servers answer all the DNS queries from the outside world. The master (primary) DNS server is located in the datacenter and is hidden from the outside world behind an internal firewall. This architecture was adequate for a smaller Internet, but in today's complex network world, this design has significant limitations. Typical DNS servers can only handle up to 200,000 DNS queries per second per server. Using the conventional design, the only way to handle more requests is to add more servers. Let's say your organization is preparing for a major event (holiday shopping, for example) and you want to make sure all DNS requests are handled. You might be forced to purchase more DNS servers in order to handle the added load. These servers are expensive and take critical manpower to operate and maintain. You can start to see the scalability and cost issues that add up with this design. From a security perspective, there is often weak DDoS protection with a conventional design. Typically, DDoS protection relies on the network firewall, and this firewall can be a huge traffic bottleneck. Check out the following diagram that shows a representation of a conventional DNS deployment. It's time for a DNS architecture paradigm shift. Your organization requires it, and today's Internet demands it. F5 Introduces A New Way... The F5 Intelligent DNS Scale Reference Architecture is leaner, faster, and more secure than any conventional DNS architecture. Instead of adding more DNS servers to handle increased DNS request load, you can simply install the BIG-IP Global Traffic Manager (GTM) in your network’s DMZ and allow it to handle all external requests. The following diagram shows the simplicity and effectiveness of the F5 design. Notice that the infrastructure footprint of this design is significantly smaller. This smaller footprint reduces costs associated with additional servers, manpower, HVAC, facility space, etc. I mentioned the external request benefit of the BIG-IP GTM...here's how it works. The BIG-IP GTM uses F5's specifically designed DNS Express zone transfer feature and cluster multiprocessing (CMP) for exponential performance of query responses. DNS Express manages authoritative DNS queries by transferring zones to its own RAM, so it significantly improves query performance and response time. With DNS Express zone transfer and the high performance processing realized with CMP, the BIG-IP GTM can scale up to more than 10 million DNS query responses per second which means that even large surges of DNS requests (including malicious ones) will not likely disrupt your DNS infrastructure or affect the availability of your critical applications. The BIG-IP GTM is much more than an authoritative DNS server, though. Here are some of the key features and capabilities included in the BIG-IP GTM: ICSA certified network firewall -- you don't have to deploy DMZ firewalls any more...it IS your firewall! Monitors the health of app servers and intelligently routes traffic to the nearest data center using IP Geolocation Protects from DNS DDoS attacks using the integrated firewall services, scaling capabilities, and IP address intelligence Allows you to utilize benefits of cloud environment by flexibly deploying BIG-IP GTM Virtual Edition (VE) Supports DNSSEC with real-time signing and validates DNSSEC responses As you can see, the BIG-IP GTM is a workhorse that literally has no rival in today's market. It's time to change the way we think about DNS architecture deployments. So, utilize the F5 Intelligent DNS Scale Reference Architecture to improve web performance by reducing DNS latency, protect web properties and brand reputation by mitigating DNS DDoS attacks, reduce data center costs by consolidating DNS infrastructure, and route customers to the best performing components for optimal application and service delivery. Learn more about F5 Intelligent DNS Scale by visiting https://f5.com/solutions/architectures/intelligent-dns-scale999Views0likes2CommentsBIG-IP Configuration Object Naming Conventions
George posted an excellent blog on hostname nomenclature a while back, but something we haven’t discussed much in this space is a naming convention for the BIG-IP configuration objects. Last week, DevCentral community user Deon posted a question on exactly that. Sometimes there are standards just for the sake of having one, but in most cases, and particularly in this case, having standards is a very good thing. Señor Forum, hoolio, and MVP hamish weighed in with some good advice. [app name]_[protocol]_[object type] Examples: www.example.com_http_vs www.example.com_http_pool www.example.com_http_monitor As hoolio pointed out in the forum, each object now has a description field, so the metadata capability is there to establish identifying information (knowledge base IDs, troubleshooting info, application owners), but having an object name that is quickly searchable and identifiable to operational staff is key. Hamish had a slight alternative format for virtuals: [fqdn]_[port] For network virtuals, I’ve always made the network part of the name, as hamish also recommends in his guidance: network VS's tend to be named net-net.num.dot.ed-masklen. e.g. net-0.0.0.0-0 is the default address. Where they conflict (e.g. two defaults depending on src clan, it gets an extra descriptor between net- and the ip address. e.g. net-wireless-0.0.0.0-0 (Default network VS for a wireless VLAN). I don't currently have any network VS's for specific ports. But they'd be something like net-0.0.0.0-0-port Your Turn What standards do you use? Share in the comments section below, or post to the forum thread.998Views0likes0CommentsLet's Talk DNS on DevCentral
DevCentral is more than a website...it's an awesome tech community where the users and contributors really feel connected and cared for. And that's how it should be. One of the great things about DevCentral is the unique cross-section of talent that exists on this site. In the nine months that I have been a part of DevCentral, I have learned that the community is comprised of super-smart users who know just about everything there is to know about F5 technology. But it's also comprised of many people who are either brand new or fairly new to F5 and networking technology in general. It's a great place to be. And, let me encourage those who have just joined DevCentral to feel right at home and dive in! Why do I say all that? Well, I'm about to embark on a series of articles discussing the Domain Name System (DNS) and how you can make it do amazing things with F5 technology. Many DevCentral users have tons of knowledge of all things DNS but many do not. So, I'm going to start out by discussing the basics of DNS in this article...what it is, why it's important, why you should care, etc. Then, in future articles, I'll start to dig deep into the technical details of the many DNS services offered by F5. This stuff is really cool, so I hope you enjoy reading these articles as much as I enjoy writing them. Let's dive into DNS together and learn a thing or two along the way... What is DNS? The Domain Name System (DNS) is just what it's name says...a system. More specifically, it's a hierarchical distributed naming system for computers, services, or other resources connected to the Internet. It associates various information with domain names that are assigned to each of the participating DNS entries. Or, more simply put, it's a system that translates easily memorized domain names into numerical IP addresses that can be used to locate computer services and devices around the globe. Let's face it...it's much easier to remember "www.f5.com" than it is to remember "65.61.115.222". Think of all the website domain names you know off the top of your head (devcentral.f5.com is, of course, your fave)...now imagine how hard it would be to memorize specific IP addresses for all those domain names! The Internet is a vast and complicated place, so as you can imagine it takes lots of organization and parts and pieces to get all this DNS stuff to work correctly. To better understand where we are today with DNS, let's talk for a minute about where we were a few years ago. In the early, simpler days of ARPANET, a memorable name was used in the place of a computer's numerical address. Back then a centrally maintained, manually entered, simple text file was used to hold the names and numerical addresses of all ARPANET computers. Periodically, this file would be updated and transmitted to each computer connected to ARPANET (which later became the Internet). That way, each computer could know the name and address of all the other computers. This worked for a while, but it soon became evident that manually updating and transferring a simple text file for all names and addresses would not work for the rapidly growing and complex Internet. In order to provide an efficient and reliable form of name translation, some really smart people designed a well-organized, distributed system that works amazingly well in today's complex, connected world. How Does DNS Work? Let's step through the process of a simple request where a user wants to access a website. The user types the address of the site (we'll use www.f5.com as an example) into the web browser. The browser has no clue where www.f5.com is, so it sends a request to the Local DNS Server (LDNS) to ask if it has a record for www.f5.com. If the LDNS does not have a record for that particular site, it begins a recursive search of the Internet domains to find out who owns www.f5.com. First, the LDNS contacts one of the Root DNS Servers, and the the Root Server responds by telling the LDNS to contact the .com DNS Server (see the diagram below). By the way, the Root Server reminds me of my kids...it never really knows the answer and it always tells you to go ask someone else. But, at least it tells you to ask someone who knows something about your question. My kids, on the other hand... The LDNS then asks the .com DNS Server if it has a record for www.f5.com, and the .com DNS Server determines the owner of www.f5.com and returns a Name Server (NS) record for f5.com. Check out the diagram below: Next, the LDNS queries the f5.com DNS Server NS record. The f5.com DNS Server looks up the name: www.f5.com. If it finds the name, it returns an Address (A) record to the LDNS. The A record contains the name, IP address, and Time to Live (TTL). The TTL (measured in seconds) tells the LDNS how long to maintain the A record before it asks the f5.com DNS Server again. Check out the following diagram: When the LDNS receives the A record, it caches the IP address for the time specified in the TTL. Now that the LDNS had the A record for www.f5.com, it can answer future requests from its own cache rather than completing the entire recursive search again. LDNS returns the IP address of www.f5.com to the host computer, and the local browser caches the IP address on the computer for the time specified in the TTL. After all, if it can hold on to the info locally, it won't need to keep asking the LDNS. The browser then uses the IP address to open a connection to www.f5.com:80 and sends a GET /... and the web server returns the web page response. DNS can get a lot more complicated than what this simple example shows, but this gives you an idea of how it works. Rest assured, we will dive into many of the details of DNS over the course of this article series, so be sure to check back for more of this DNS goodness! Let's Dig! It's good to see picture examples of the DNS functionality, but sometimes it's nice to see the details of the different records via the command line. To show this, I used the dig tool to view details of the NS record and A record for www.f5.com. Here are the details of the NS record: Using pdns1.f5.com (from the NS record above), you can query for the A Record: Notice the ANSWER SECTION that shows the following: Domain name (www.f5.com) TTL (30) IN is the CLASS and stands for Internet A is the TYPE of record (maps the domain name to the IP address) The IP Address (65.61.115.222) Why Is DNS So Important? In short, if DNS breaks, the Internet breaks. In addition, market demand for DNS services increases each year. Websites are becoming more complex, and many sites today require hundreds of DNS queries just to load one page correctly. Smart phone apps also require multiple DNS queries. Since your business relies on web applications, it relies heavily on DNS. Fortunately, F5 provides fast, secure, and reliable DNS services. Using the BIG-IP Global Traffic Manager (GTM), F5 offers intelligent and automatic load balancing of web applications across data centers while improving application performance. In this series of articles, we will look at many DNS topics like: DNSSEC - real time DNS request signing DNS 64 - translating IPv4 to IPv6 automatically IP Anycast - spreads the load across several devices and makes it hard to DDoS Dynamic failover between data centers during outages while maintaining persistence to prevent broken sessions Scaling Global Server Load Balance (GSLB) and DNS performance using multicore Clustered Multiprocessing (CMP) technology DNS Express -authoritative for zones and completely shields internal DNS servers from Internet queries DNS iRules - you can do ANYTHING with an iRule! These are a sample of the many things to look forward to in these articles. Be on the lookout for all the DNS fun, and please provide some feedback if you want to see anything else!899Views0likes1CommentQuick! The Data Center Just Burned Down, What Do You Do?
You get the call at 2am. The data center is on fire, and while the server room itself was protected with your high-tech fire-fighting gear, the rest of the building billowed out smoke and noxious gasses that have contaminated your servers. Unless you have a sealed server room, this is a very real possibility. Another possibility is that the fire department had to spew a ton of liquid on your building to keep the fire from spreading. No sealed room means your servers might have taken a bath. And sealed rooms are a real rarity in datacenter design for a whole host of reasons starting with cost. So you turn to your DR plan, and step one is to make certain the load was shifted to an alternate location. That will buy you time to assess the damage. Little do you know that while a good start, that’s probably not enough of a plan to get you back to normal quickly. It still makes me wonder when you talk to people about disaster recovery how different IT shops have different views of what’s necessary to recover from a disaster. The reason it makes me wonder is because few of them actually have a Disaster Recovery Plan. They have a “Pain Alleviation Plan”. This may be sufficient, depending upon the nature of your organization, but it may not be. You are going to need buildings, servers, infrastructure, and the knowledge to put everything back together – even that system that ran for ten years after the team that implemented it moved on to a new job. Because it wouldn’t still be running on Netware/Windows NT/OS2 if it wasn’t critical and expensive to replace. If you’re like most of us, you moved that system to a VM if at all possible years ago, but you’ll still have to get it plugged into a network it can work on, and your wires? They’re all suspect. The plan to restore your ADS can be painful in-and-of itself, let alone applying the different security settings to things like NAS and SAN devices, since they have different settings for different LUNS or even folders and files. The massive amount of planning required to truly restore normal function of your systems is daunting to most organizations, and there are some question marks that just can’t be answered today for a disaster that might happen in a year or even ten – hopefully never, but we do disaster planning so that we’re prepared if it does, so never isn’t a good outlook while planning for the worst. While still at Network Computing, I looked at some great DR plans ranging from “send us VMs and we’ll ship you servers ready to rock the same day your disaster happens” to “We’ll drive a truck full of servers to your location and you can load them up with whatever you need and use our satellite connection to connect to the world”. Problem is that both of these require money from you every month while providing benefit only if you actually have a disaster. Insurance is a good thing, but increasing IT overhead is risky business. When budget time comes, the temptation to stop paying each month for something not immediately forwarding business needs is palpable. And both of those solutions miss the ever-growing infrastructure part. Could you replace your BIG-IPs (or other ADC gear) tomorrow? You could get new ones from F5 pretty quickly, but do you have their configurations backed up so you can restore? How about the dozens of other network devices, NAS and SAN boxes, network architecture? Yeah, it’s going to be a lot of work. But it is manageable. There is going to be a huge time investment, but it’s disaster recovery, the time investment is in response to an emergency. Even so, adequate planning can cut down the time you have to invest to return to business-as-usual. Sometimes by huge amounts. Not having a plan is akin to setting the price for a product before you know what it costs to produce – you’ll regret it. What do you need? Well if you’re lucky, you have more than one datacenter, and all you need to do is slightly oversize them to make sure you can pick up the slack if one goes down. If you’re not one of the lucky organizations, you’ll need a plan for getting a building with sufficient power, internet capability, and space, replace everything from power connections to racks to SAN and NAS boxes, restorable backups (seriously, test your backups or replication targets. There are horror stories…), and time for your staff to turn all of these raw elements into a functional datacenter. It’s a tall order, you need backups of the configs of all appliances and information from all of your vendors about replacement timelines. But should you ever need this plan, it is far better to have done some research than to wake up in the middle of the night and then, while you are down, spend time figuring it all out. The toughest bit is keeping it up to date, because a project to implement a DR plan is a discrete project, but updating costs for space and lists of vendors and gear on a regular basis is more drudgery and outside of project timelines. But it’s worth the effort as insurance. And if your timeline is critical, look into one of those semi trailers – or the new thing (since 2005 or 2007 at least), containerized data centers - because when you need them, you need them. If you can’t afford to be down for more than a day or two, they’re a good stopgap while you rebuild. SecurityProcedure.com has an aggregated list of free DR plans online. I’ve looked at a couple of the plans they list, they’re not horrible, but make certain you customize them to your organization’s needs. No generic plan is complete for your needs, so make certain you cover all of your bases if you use one of these. The key is to have a plan that dissects all the needs post-disaster. I’ve been through a disaster (The Great NWC Lab Flood), and there are always surprises, but having a plan to minimize them is a first step to maintaining your sanity and restoring your datacenter to full function. In the future – the not-too-distant future – you will likely have the cloud as a backup, assuming that you have a product like our GTM to enable cloud-bursting, and that Global Load Balancer isn’t taken out by the fire. But even if it is, replacing one device to get your entire datacenter emulated in the cloud would not be anywhere near as painful as the rush to reassemble physical equipment. Marketing Image of an IBM/APC Container Lori and I? No, we have backups and insurance and that’s about it. But though our network is complex, we don’t have any businesses hosted on it, so this is perfectly acceptable for our needs. No containerized data centers for us. Let’s hope we, and you, never need any of this.614Views0likes0CommentsF5 Friday: Infoblox and F5 Do DNS and Global Load Balancing Right.
#F5Friday #F5 Infoblox and F5 improve resilience, compliance, and security for global load balancing. If you’re a large corporation, two things that are a significant challenge for your Network Administrators’ are DNS management and Global Load Balancing (GLB) configuration/management. With systems spread across a region, country, or the globe, the amount of time investment required to keep things running smoothly ranges from “near zero” during quiet times to “why am I still here at midnight?” in times of major network change or outages. Until now. Two market leaders – Infoblox and F5 Networks have teamed up to make DNS – including DNSSEC – and GLB less time-consuming and error prone. Infoblox has extended their Trinzic DDI family of products with Infoblox Load Balancer Manager (LBM) for F5 Global Traffic Manager (GTM). The LBM turns a loose collection of load balancers into a dynamic, automated, Infoblox Grid™. What does all that rambling and all those acronyms boil down to? Here’s the bullet list, followed with more detail: Centralized Management of DNS and global load balancing services. Application of Infoblox Security Framework across F5 GTM devices. Automation of best practices. Allow administrators to delegate responsibility for small subsets of the network to responsible individuals. Enables rapid identification of network problems. Track changes to load balancing configurations for auditing and compliance. While F5 GTM brings DNS delivery services, global load balancing, workload management, disaster recovery, and application management to the enterprise, Infoblox LBM places a management layer over both global DNS and global load balancing, making them more manageable, less error prone, and more closely aligned to your organizational structure. LBM is a module available on Infoblox DDI Grid devices and VMs, and GTM is delivered either as a product module on BIG-IP or as a VM. With unified management, Infoblox LBM shows at-a-glance what is going on in the network: Since Infoblox DDI and F5 BIG-IP GTM both interface to multiple Authentication, Authorization, and Access Control (AAA) systems, Infoblox LBM allows unified security management with groups and users, and further allows control of a given set of objects (say all hardware in the San Francisco datacenter) to local administrators without having to expose the entire infrastructure to those users. For best practices, LBM implements single-click testing of connections to BIG-IP GTM devices, synchronization of settings across BIG-IP GTM instances for consistency, and auto discovery of settings, including protocol, DNS profiles, pools, virtual IPs, servers, and domains being load balanced. In short, LBM gives a solid view of what is happening inside your BIG-IP GTM devices and presents all appliances in a unified user interface. If you use BIG-IP iControl, then you will also be pleased that Infoblox LBM regularly checks the certificates used to secure iControl communications and validates that they are not rejected or expired. For more information about this solution, see the solution page. Previous F5 Fridays F5 Friday: Speed Matters F5 Friday: No DNS? No … Anything. F5 Friday: Zero-Day Apache Exploit? Zero-Problem F5 Friday: What's Inside an F5? F5 Friday: Programmability and Infrastructure as Code F5 Friday: Enhancing FlexPod with F5 F5 Friday: Microsoft and F5 Lync Up on Unified Communications599Views0likes0Comments