/var/lib/mysql @ 100%
Attached is the screenshot of my df -h I noticed that my /var/lib/mysql is @ 100% could somebody please help me fix this issue. I issued this command "find /var/lib/mysql -xdev -type f -exec du {} \; | sort -rn | head -20" and here is the output: Your immediate response would be greatly appreciated.
Replacing blade on Viprion
Hi, Everyone: I have an HA pair of Viprion with old B2100, one in each chassis, I am planning to replace it with B2150. I saw some document, some suggestion to use UCS file, the other suggestion is to use SCF files. any catches I need to be aware? If someone has already done that, and can show the procedure that will be great help. Thanks
What hardware comes with 'Better' and 'Best' Viprion software?
Hello all As far as I know, Viprion's bundles 'Better' and 'Best' come with a bunch of modules each ('Best'='Better'+APM+ASM); anyway I still have some doubts, such as: - If I purchase a Viprion Chassis 2400 in 'Better' mode, with what kind of hardware will it come? How many blades will come with the chassis? - If I purchase a Viprion Chassis 2400 in 'Best' mode, with what kind of hardware will it come? How many blades will come with the chassis? - What happens with the other two models (4480 and 4800)? These are bigger chassis... would they come with more blades? Please advise
How to generate traffic from a VIP on the F5
In many cases I am asked if I can generate traffic from a VIP on the F5. In other words, I am asked to initiate a communication from a VIP that exists on the F5. Lets say a VIP on the F5 was actually a Windows Server. I could run "telnet xxx.xxx.xxx.xxx" to initiate traffic from the Windows Server. Is there a way to generate traffic from the F5 and have it "look" like the traffic is coming from a VIP on the F5?
Renaming VLANs on a Viprion chassis and vCMP Guests
I'm in the unenviable position of having to rename a dozen+ VLANs on a Vipreon chassis and vCMP guests. The reason stems from having to combine guests from 2 pairs of chassis where one pair is being decommissioned. Unfortunately the original admin who set up the chassis did not use the same VLAN naming convention for both sets of chassis, and the same VLAN tags exist in both places. This results in guests that are brought over from the old chassis not being able to access the network as the VLAN names do not match up. The destination is 2 chassis where the LTMs are in an active-standby pair with the members of the pair being split between the 2 chassis. (Same situation on the chassis I'm migrating from.) Can I get a sanity check on what I'd like to do here? Force the guests offline on the secondary chassis. Shut down the guests. Rename the VLANs on the Vipreon by editing bigip.conf and bigip_base.conf load sys config verify load sys config (or just reboot the chassis to be thorough) Bring up one guest offline, repeat the same procedure on the guest. Failover during a maintenance window and test. Repeat for other guests. If everything works there, repeat the same procedure on the primary chassis. Resync the configs once all changes are made and tested. At this point the guests that are migrated over should be able to access the newly renamed VLANs as well. Am I missing anything here?F5 Viprion Blade Model
I'm probably missing something obvious but... I'm trying to find our what model Viprion blades we have in a very remote chassis (we're in South Africa, the chassis is in Paris). I can find the blades serial numbers by performing a "tmsh show sys hardware", but I can't find the blade model numbers (we have a 4400 Viprion chassis so I'm trying to ascertain if the blades are 4340Ns or 4300s). Can anyone help?Blade assign incorrectly interfaces to VCMP
I'm setting up two viprions, and when performing connectivity tests, the computer that will be the standby is not responding, a trunk for port 7 and 8 was configured with lacp active in both Viprion host, when we check the interfaces in the vguest, on the first computer the Ports are inherited from the host, but on the second computer are different interfaces 5 and 6 (on the host are 7 and 8), is it possible to change the interfaces that the host assigns to vcmp? Or is there any way to correct the interfaces? I try to modify the host interfaces in vguest but they appear as pending
viprion - clsh commands
A couple of viprion questions please. 1) Is there a list of all the specific "clsh" commands? 2) When to use clsh and tmsh clsh? 1 may answer this. 3) What is the command to see which blade is the primary? 4) I cant seem to get the "clsh --slot" command correct? What is correct syntax? Here is what I have tried. [root@work:/S1-green-S:Active:Standalone] config clsh Usage: /usr/bin/clsh [options] ... --slot=n,n Slots to include, or "local", or "all" [all] --color=c,c Colors to include, or "all" [green] [root@work:/S1-green-S:Active:Standalone] config [root@work:/S1-green-S:Active:Standalone] config clsh --slot=3 all === slot 2 addr 127.3.0.2 color blue === === slot 3 addr 127.3.0.3 color green === bash: all: command not found === slot 4 addr 127.3.0.4 color blue === === slot 1 addr 127.3.0.1 color green === [root@work:/S3-green-P:Active:Standalone] config clsh --slot=3 Usage: /usr/bin/clsh [options] ... --slot=n,n Slots to include, or "local", or "all" [all] --color=c,c Colors to include, or "all" [green] [root@work:/S3-green-P:Active:Standalone] config Thank you,
Is it safe to remove Installed Images on the Viprion host?
I am about to upgrade our F5's to 12.1.2 HF1 with an engineering fix (from 12.1.1) and I want to clean up unused images. We have some currently unused vCMPs that run 11.5.3, but they are not powered on. Is it safe to delete Software Volumes that have 11.5.3 and it not impact the vCMPs that use 11.5.3? The Viprion is running 12.1.1 on HD1.4, but has a HD1.1, 1.2, 1.3 with 11.5.3 on them. Thank you
