Share what you learned on DevCentral in 2025
Hello! With the year quickly coming to a close it feels like there is no better time to have everyone share something they learned on DevCentral over this past year. Whether it be from a post you or someone else made, a technical article, or code share. Leave a comment with your favorite or most valuable piece of knowledge you learned from the community. Or drop a link to the post and share what it taught you. Thank you to everyone who has shared or sought knowledge within DevCentral this year! I look forward to seeing what everyone has to share. -Melissa
BIG-IQ: how to change interval checks for health status of pools and poolmembers
Greetings, yesterday I noticed that the BIG-IQ does take its sweet time to notify the user of a failing healthcheck. In my case I noticed that the poolmember went down at 04:20 PM (source LTM log) at the BIG-IQ informed me via GUI at 04:24 PM with the message that the poolmember went down at 04:20PM I'm guessing that the BIG-IQ checks the LB for health status in an interval. Looks like a value between 3 to 5 minutes. Does anyone know how I can lower the interval so the user in BIG-IQ gets notified more sooner than 3-5 minutes ?
Big-IP not recognized by Big-IQ
Dear Techs, I'm in a strange situation where I'm supposed to add both F5 Big-IP with Big-IQ. Both Big-IP and Big-IQ are in same subnet, so firewall isn't a question. The Big-IP are in HA. I've successfully added the Standby unit with Big-IQ without any issues while adding the Active unit I'm getting below error message : The device <Big-IP-Management-IP> (null) is not a Big-IP device. I've added a total of 7 devices successfully, using the same procedure, same authentication. Any help with be greatly appreciated. Big IQ version : 8.0.0 Big-IP version : 14.1.4 thank you
BigIQ integration with Cisco ACS (TACACS+)
I'm working with Big-IQ Central Manager and would like to authenticate against our TACACS (Cisco ACS) and use the RBAC capabilities; however the documentation is slim at best. I'm getting an error, "User has no roles or groups associations. Trying to compare what we set our LTMs to authenticate using remote roles that are defined in ACS (below) to what I have on our BigIQ. On our LTMs: 1. No users defined local 2. Authentication - Remote - TACACS+ 3. Remote Role Groups a. Group Name = TAC-Auth b. Line Order 20 (Relative to our env.) c. Attribute String = F5-LTM-User-Info-1=TAC-Auth d. Remote Acccess = Enabled e. Assigned Role = Other = %F5-LTM-User-Role f. Partition Access = Other = %F5-LTM-Partition g. Terminal Access = Other = %F5-LTM-User-Console On ACS (Only giving one example) Shell Profiles 1. F5-Device-TACAuth-Admin 2. Custom Attributes a. F5-LTM-User-Info-1 = TAC-Auth b. F5-LTM-User-Console = enable c. F5-LTM-User-Role = Administrator d. F5-LTM-Partition = All BigIQ 1. Auth Providers = a. Name = NA_ACS b. Type = TACACS+ 2. User Groups a. F5_Admin c. Authorization Attributes F5-BigIQ-User-Info = F5_Admin %F5-BigIQ-User-Role = Administrator ACS - Note: My understanding is that since BigIQ doesn't use partitions or the Terminal/Console role it might not be needed. 2. Custom Attributes a. F5-LTM-User-Info-1 = F5_Admin b. F5-LTM-User-Role = Administrator Thank you in advance for any insight! /jeffBIG-IQ 8.3 - no BIG IQ Central Management option
Trying to build a BIG IQ v 8.3 on Hyper V but I keep running into an issue where I can licence the box using a trial licence (all appears to be working as expected) create the Master Keys and reset the Password but as soon as I get to the System Personality the option for BIG-IQ Central Management is not available. It only presents me the option of BIG-IQ Data Collection Device. If skip the licence at Step 1 then I also get the option to create a License Manager but that's not really very useful either. 🤨 The guide I am following is the F5 one - BIG IQ Build Guide - and have assigned the VM 32GB RAM and 8 cores after initially trying it with half the above figures which I thought might be the issue but still no joy. Have deleted the VM and recreated using a new copy of the VHD file - same problem seen so I am at a bit of a loss as to what to try next. Any suggestions would be much appreciated.
F5 - AS3 - BIGIQ / BIGIP SchemaVersion Missunderstanding
Dear community, I was wondering about the AS3 version currently used in order to deploy my AS3 on my BIG-IP target through BIG-IQ. BIG-IQ should install this current AS3 version on F5 BIG-IP target when deploying AS3 declaration. Checking on my BIG-IQ, 3.44.0 curl -sk -H "Content-Type: application/json" -H "X-F5-Auth-Token: $TOKEN" -X GET "https://$BIGIQ/mgmt/shared/appsvcs/info" {"version":"3.44.0","release":"3","schemaCurrent":"3.44.0","schemaMinimum":"3.0.0"} Checking on my F5 BIG-IP, v 3.44.0 #pwd /var/config/rest/iapps/f5-appsvcs # cat version 3.44.0-3 My current AS3 declaration (I'm manually forcing schemaVersion) through BIG-IQ : { "class": "AS3", "action": "patch", "schemaVersion": "3.44.0", "patchBody": [ { "class": "ADC", "schemaVersion": "3.44.0", "target": { "address": "X.X.X.X" }, "op": "add", "path": "/Automation/APP_TEST_1.2.12.140_446", "value": { "class": "Application", "remark": "REFERENCE : NULL_REFERENCE_20241109215237", "schemaOverlay": "AS3-F5-HTTPS-PASSTHROUGH-lb-template-big-iq", .... etc } Application Deployment logs from my BIG-IQ : At the bottom : "schemaVersion": "3.12.0" I don't understand why it's using this older schemaVersion, it should use the current 3.44.0. Is there any policy on BIG-IQ that can enforce this weird behavior ? { "id": "autogen_a4c95a0f-13e3-4078-92c3-3a8e6ea6f10c", "class": "ADC", "controls": { "class": "Controls", "userAgent": "BIG-IQ/8.3 Configured by API" }, "Automation": { "class": "Tenant", "APP_TEST_1.2.12.140_446": { "class": "Application", "remark": "REFERENCE : NULL_REFERENCE_20241109215237", "template": "tcp", "serviceMain": { "pool": "/Automation/APP_TEST_1.2.12.140_446/HTTPS_443_pool", "class": "Service_TCP", "enable": true, "profileTCP": { "use": "/Automation/APP_TEST_1.2.12.140_446/HTTPS_443_tcp_profile" }, "virtualPort": 446, "virtualAddresses": [ "1.2.12.140" ], "persistenceMethods": [ "source-address" ], "profileAnalyticsTcp": { "use": "/Automation/APP_TEST_1.2.12.140_446/Analytics_TCP_Profile" } }, "HTTPS_443_pool": { "class": "Pool", "members": [ { "adminState": "enable", "shareNodes": true, "servicePort": 443, "serverAddresses": [ "1.2.12.13" ] } ], "monitors": [ { "use": "/Automation/APP_TEST_1.2.12.140_446/HTTPS_443_monitor" } ], "loadBalancingMode": "least-connections-member" }, "HTTPS_443_monitor": { "send": "GET /\r\n", "class": "Monitor", "receive": "none", "targetPort": 443, "monitorType": "http", "adaptiveWindow": 180, "adaptiveLimitMilliseconds": 1000, "adaptiveDivergencePercentage": 100 }, "Analytics_TCP_Profile": { "class": "Analytics_TCP_Profile", "collectCity": false, "collectRegion": true, "collectCountry": true, "collectNexthop": false, "collectPostCode": false, "collectContinent": true, "collectRemoteHostIp": false, "collectedByClientSide": true, "collectedByServerSide": true, "collectRemoteHostSubnet": true }, "HTTPS_443_tcp_profile": { "class": "TCP_Profile", "synMaxRetrans": 3, "finWaitTimeout": 5 } } }, "updateMode": "selective", "schemaVersion": "3.12.0" } Thanks in advance for your help !Big-iq 8.2 questions
Hello, I am tasked with implementing big-iq 8.2, but the documentation isn't clear about some things. I would like to consolidate the management of a number of different f5 load balancer sets. But there are some constraints, and I lack the big-iq terminology to know what I am looking for. So I will give an example. I have f5 pairs in Colorado, Virginia, Utah, and Oregon. - Colorado and Virginia are failover sites for each other. - Utah, and Oregon are also failover sites for each other. But the Colorado/Virginia sites and Utah/Oregon sites are significantly different. Separating them out in silos seems wrong. how do I keep these managed centrally? Do I create big-ip clusters, or device groups? One for Colorado and Virginia, and the other for Utah, and Oregon? I am just confused, and don't know where to start: I have been digging into the documentation but I think i need to be reset on some of the basics. --jasonBIG-IQ DNS TPS Per Geo Location
Hi, I recently deployed a BIG-IQ, to manage all my F5 LTM and DNS Tenants, I'm reviewing the information shown on the different dashboards of BIG-IQ. On the DNS Dashboard, there is a section named TPS Per Geo Location. For some reason i'm just seeing the world map, but with no data. Does anyone knows how to enable information on this map? regards,
