Forum Discussion
Hi
Yep .Currently I see requests logged on BIG-IP, but not on BIG-IQ.
I have congfig remote log profile, then attached it to VS.
I sent to you information detail attach picture.
Thanks
Hung Hoang
Is 10.0.103.11 IP of LogNode or IP of BIG-IQ?... Make sure that BIG-IQ logging is configured through LogNode (https://techdocs.f5.com/kb/en-us/products/big-iq-security/manuals/product/bigiq-security-administration-4-4-0/16.html) and it is active.
Thanks, Ivan
- Hoang_HungSep 01, 2020Cirrus
Yep
IP address 10.0.103.11, 10.0.103.12 and 10.0.103.13 iss IP for Lof Node (BIG-IQ DCD)
all Node is active now .
Thanks
Hung Hoang
- Ivan_ChernenkiiSep 01, 2020Employee
Hoang,
In such case, from configuration point of view, all looks correct and should work.
The only thing that you can do is gather tcpdumps on BIG-IP, Log Nodes, BIG-IQ and check how remote logging passes... and look at logs on BIG-IP, Log Nodes, BIG-IQ to find some errors.
There is no way to provide more help without access to the system.
If you won't find any other helpful debug information, then I would suggest you to open official SR for F5,
Thanks, Ivan