virtual server fault tolerance (active-passive)

[FZ]

Hi,

I have two servers that are working in active-passive mode.

Each server has a unique DNS entry.

The active server has been configured in F5 and is working properly.

The goal is to be able to use a single URL and to have F5 forward the traffic to the active server based on the state of the servers.

appliance version is 12.1.2

Thanks,

Felix

[Sebastiansierra]

Hi,

You can use Priority Group Activation to assign a higher value to the principal server, and, if it fails, send the request to the second server with a lower Priority Group Activation.

Follow this link to configure it:

https://support.f5.com/csp/article/K13525153#:~:text=To%20enable%20priority%20group%20activation,in%....

[FZ]

Thank you for your response.
This does not achieve the goal of a single URL for both servers...
As my chname points to one virtual server..

[FZ]

Hi,
unfortunetly not yet..