Technical Forum
Ask questions. Discover Answers.
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to connect to GUI on F5 VE via hypervisor

Alireza_Taghadd
Nimbostratus
Nimbostratus

I downloaded trial version of F5 Virtual Edition BIG-IP VE 13.1.3 and installed on hypervisor.

I changed the Management IP address on the hypervisor to be in the same subnet as my local machine. My local machine is: 192.168.34.119 and f5 VM's IP address is: 192.168.34.125. But, I am unable to access f5 VE GUI from my machine over https (https://192.168.34.125).

but this IP Address is pingable from PC and SSH.

I'm not able to connect to GUI.

When I try to ping this IP Address, I get this - Reply from 192.168.34.125: Destination host reachable. I know that the VM is running. So, it must be something with the network but I don't know how to troubleshoot this issue ?

Also, I can test SSH access and it's working properly.

Any help would be appreciated.

4 REPLIES 4

Ahmed_Galal
Cirrostratus
Cirrostratus

But, I am unable to access f5 VE GUI from my machine over https (https://192.168.34.125).

but this IP Address is pingable from PC and SSH.

I'm not able to connect to GUI.

When I try to ping this IP Address, I get this - Reply from 192.168.34.125: Destination host reachable.

 

is it pingable and reachable through SSH OR NOT???!!!

 

if yes then you have share error, if not check hypervisor Network settings and make sure that both devices are

Alireza_Taghadd
Nimbostratus
Nimbostratus

Hi Ahmed,

Thank you for your email.

Yes, it is pingable and reachable through SSH as well.

 

error : via Chrome and IE

 

 

This site can’t be reached

192.168.34.125 refused to connect.Try:

  • Checking the connection
  • Checking the proxy and the firewall

ERR_CONNECTION_REFUSED

 

would you please advise or recommend ?

Ahmed_Galal
Cirrostratus
Cirrostratus

login using SSH and check httpd service using command ( bigstart status httpd tomcat syslog-ng ) and try to restart service using command ( bigstart restart httpd tomcat )

 

you can also troubleshoot service using this article ( https://support.f5.com/csp/article/K11093 )

wassim
Altostratus
Altostratus

You might have single NIC configurations:

  • The port for the Configuration utility is moved from 443 to 8443.

https://<IP Address>:8443

 

https://techdocs.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/bigip-ve-setup-microsoft-hyper-v-13-0-0/1.html