Forum Discussion

SL's avatar
SL
Icon for Cirrus rankCirrus
Jul 20, 2018

Sending same requests to multiple endpoints

Hi All

I am trying to send same SNMP-Traps to more than one node.

I have enabled Clone Pool, I can see the pool counters increasing, however a TCPDump doesnt show any traffic and it is not being received by the Node configured in the Clone Pool.

Assistance as to what I might be missing.

This is my configuration currently

    ltm virtual /tsom/vs_is1 {
    clone-pools {
        /tsom/pool_is1_clone-dr {
            context serverside
        }
    }
    destination /tsom/10.10.10.103:162
    mask 255.255.255.255
    pool /tsom/pool_is1
    profiles {
        /Common/fastL4 { }
    }
    source 0.0.0.0/0
    source-address-translation {
        pool /tsom/snatpool_tsom
        type snat
    }
    translate-address enabled
    translate-port enabled
}
ltm pool /tsom/pool_is1 {
    load-balancing-mode ratio-member
    members {
        /tsom/10.10.10.143:162 {
            address 10.10.10.143
            priority-group 10
            ratio 1000
        }
        /tsom/10.10.10.29:162 {
            address 10.10.10.29
            priority-group 1
        }
    }
    min-active-members 1
    monitor /Common/gateway_icmp and /tsom/monitor_tsm-tcp-1834 
}

ltm pool /tsom/pool_tsom_is1_clone-dr {
    members {
        /tsom/10.10.10.29:162 {
            address 10.10.10.29
        }
    }
    monitor /Common/gateway_icmp and /tsom/monitor_tsm-tcp-1834 
}

ltm snatpool /tsom/snatpool_tsom {
    members {
        /tsom/10.10.10.250
    }
}
No RepliesBe the first to reply