Forum Discussion

portoalegre's avatar
portoalegre
Icon for Nimbostratus rankNimbostratus
Nov 05, 2020
Solved

Reset Trust after upgrade

Hi all!   I'm upgrading my LTM pair (Primary/Standby) i2600 from 12.1x to 14.1.x. Will I need to reset trust between devices to syncronize?   If I remember I had to once after a software upgr...
application delivery
BIG-IP
LTM
  • Lidev's avatar
    Lidev
    Nov 05, 2020

    Hi portoalegre,

     

    No need to reset Device Trust Members devices after software upgrade.

    You right, if you are replace hardware equipment you have to do it (or change management ip)

     

    Regards

jaikumar_f5's avatar
jaikumar_f5
Icon for MVP rankMVP
Nov 05, 2020

The trust will not break during the upgrade.

You'll be starting with the upgrade on the Standby as usual. But the configs wont get synchronized (if there's any changes happening during this time frame) - as the SW versions will be different.

Then you'll make the standby as Active and start the upgrade on the other box. The trust will be same and finally devices will be back to In-Sync.