Forum Discussion
Hi,
Yes, that's part of it. - that sets how the radius part is handled.
But annoyingly what is the config under the drop down as well?
So External User > Role,
So in auth only, a good radius responce will log the user in at the level of External User > Role is set to.
Also do you have "Failback to local set" and are the users in radius and locally as well with the same user name???? This might be over riding things.
P
Hi here (attached) as for the service type, what should i select?
- chocokoalaApr 25, 2022Altostratus
I remove the enable Fallback to local but still the same, i set the authentication type to Authenticate only
- Apr 25, 2022
Cool,
So that "Administrator" setting is what's over riding everything and setting everything everyone to Admin.Personally i set that to No Access, Then you MUST have a access right set to gain access.
The other thing to then doi is change the service type from "Authenticate Only" to something suitable for your use case. I must admit i found info on those settings a bit weak.
But i used default and everything burst into life on my side.
What that will do, is then tell the IF to look at the other parameters rather than just authentication and allowing the users in at the default level which is set by "External Users > Roles"
Hope that helps.- Apr 25, 2022
Also what groups have you setup? And have you got the same config on your radius server side?
- chocokoalaApr 25, 2022Altostratus
i set it to no access, and icant login anymore on that read only account, i am trying to check with my colleague who handles the radius part