Forum Discussion
Thanks paulj !
We have that configuration but still shows down even though I can successfully curl to the site from our GTM. We're looking into the prober pool configuration and routing to determine the source of the health check.
JustCooLpOOLe You might take this opportunity on the GTM to perform a tcpdump to see what you are receiving back from the destination. The following should be a close enough syntax and you can change the port if it's HTTPS rather than HTTP.
tcpdump -nni 0.0:nnp host <gtm_ip> and host <destination_IP> and port 80
It is common that sometimes a curl will function slightly different than the health monitor. A good example of this is I was able to perform a curl from my lab LTM to my lab apache server and the response was the one I expected but when I did a very similar request using the health monitor it would fail because the server said it was not able to find the destination that I requested. I ended up having to add in an entry that allowed the server to respond to any request to itself on 80 which I later narrowed it down once I came up with a lab root domain to use.
- JustCooLpOOLeMay 22, 2023Cirrocumulus
Yeah, we're running tcpdumps now to see what's happening. I'll update the thread if we find out what's going on.