monitor does not work https

Hi jhonyy_rg , 
I played around your current version on F5 Bug tracker ,

and I think you are hiting in this bug >>>  https://cdn.f5.com/product/bugtracker/ID1026781.html 

> in your send string I see \r\n\r\n so it's doubled , try to remove one  "\r\n" to make your send sring has singe "\r\n" not doubled. 

> Or try one workaround that are in the bug article which i sent above. 

>> To capture monitor traffic : 

tcpdump -s0 -nni 0.0:nnnp src host <Self_IP address> and dst host <Backeend_server_IP> and dst port 443 -vw /var/tmp/HTTPs_monitor.pcap


# if you don't know which selfip address monitor your server use ip route get utility on bash like below : 

bash#ip route get < Backend_server_IP > 

This command will give you which self IP on your bigip monitor your server. 

Note : if your appliace in HA group ( you have active and standby ) this Capture will work efficient with you as , F5 bigip monitor the backend servers using selfip address and send real data traffic using Floating ip address on HA deployment. 
So if you run standalone not HA , This Capture command will capture ( Real data traffic and monitor traffic too ) because standalone systems use selfip address to handle users data traffic as well as bigd or monitor traffic. 

Check this and let me know 🙂