F5Team
Feb 28, 2023Cirrus
Iquery connection with translation address
Hi All,
I need some help to understand the iquery connection to translation address . For example
Address : 1.1.1.1
Transalation address 2.2.2.2
F5 will initiate the traffic to 1.1.1.1 or 2.2.2.2 , As my understanding F5 device initiate the traffic to 1.1.1.1 to establish the iquery.
But on the device i could see F5 initiate the traffic to translation address.
is there any document to refer which destination iquery mesh will connect when translation address.