Forum Discussion
Below command should work to modify SSL Profile on the VS.
tmsh modify ltm virtual [virtual server name] profiles add { [client-ssl profile name] }
For the error that you are getting, do you have multiple client SSL on your VS and one of the profile is acting as default SSL? Please refer below articles.
https://cdn.f5.com/product/bugtracker/ID794493.html
https://support.f5.com/csp/article/K05426346
- Al_EstrellasNov 26, 2020Nimbostratus
The above solution did not do the trick even I removed the chain, most likely because I am using the same key/certificate just using a different SSL profile to do the test.
I tried using a different key/certificate but also different domain and it worked. On December 2nd week, I'll get the new/replacement cert and will test the procedure in the KB and see if it works on same domain name different key/cert.
Here's the commands for reference:
modify /ltm virtual https_vs profiles add { newcert-clientssl {context clientside } }
modify /ltm virtual https_vs profiles delete { oldcert-clientssl }
I'll update this on December when I renew cert and will use a different SSL profile.
Thanks for the help.