I have one WideIP with 3 Pools on Topology load balancing. In topology records i have Subnet1 ==> Pool1 Weigh 10 Subnet1 ==> Pool2 weight 5 Subnet1 ==> Pool3 weight 1 Now if the Pool1 is down or disabled it should failover to Pool2, that is how it was in 3DNS and 9.x but in 10.x and above it doesnt seem to be working. Anyone faced this issue?

Are you using longest match for topology? I've encountered this issue before which caused unexpected answers to be returned: http://support.f5.com/kb/en-us/solutions/public/14000/700/sol14794.html

Forum Discussion

Mui_64918

Cirrus

Feb 25, 2014

GTM Topology across pools issue when one of the pool is down or disabled

I have one WideIP with 3 Pools on Topology load balancing. In topology records i have Subnet1 ==> Pool1 Weigh 10 Subnet1 ==> Pool2 weight 5 Subnet1 ==> Pool3 weight 1

Now if the Pool1 is down or disabled it should failover to Pool2, that is how it was in 3DNS and 9.x but in 10.x and above it doesnt seem to be working. Anyone faced this issue?

BIG-IP DNS

deployment

Cory_50405
Noctilucent
Feb 26, 2014
Are you using longest match for topology? I've encountered this issue before which caused unexpected answers to be returned:

http://support.f5.com/kb/en-us/solutions/public/14000/700/sol14794.html