Technical Forum
Ask questions. Discover Answers.
cancel
Showing results for 
Search instead for 
Did you mean: 

BigIP VE - Multiple VLANs on single partition with single interface

Hi

We have current BigIP VE HA Pair with 3 partitions and 5 interfaces towards the VMWare ESXI in total.

A need has come up to add 3 more interfaces to the BigIP IP VE but we need to use the current VLANS attached to the vNICS.

The BigIPs connect to a Google Anthos solution and were wondering if

We can use the a single VLAN in more than one partition point to the same vNIC interface on VMWARE

Two partitions using same network interface?

Two partitions use different network interfaces connected to same VLAN. (so need to add new network interfaces to the F5 VMs and map it to same VMware port group)

 

1 ACCEPTED SOLUTION

HI, yes this actually helped a lot thanks. The information helped us as we realised the VLANS were actually in Common and not the particular partition.

View solution in original post

2 REPLIES 2

buulam
Community Manager
Community Manager

Hey @southern_shredd you could do this if these VLANs are in the Common partition. If a VLAN exists in one partition and you create a virtual server in a different partition, you won't see that partition on the list.

~~~~~~~~~~~~~~~~~~
@buulam / YouTube.com/DevCentral

HI, yes this actually helped a lot thanks. The information helped us as we realised the VLANS were actually in Common and not the particular partition.