Forum Discussion
Milan_61890
Nimbostratus
Nimbostratus2 LACP paths to 2 switches without spanning-tree
Is the following setup possible?:
A BIG-IP appliance should be redundantly connected to two switches without using spanning-tree.
Each switch should be connected to the BIG-IP by two aggregated inter...
What_Lies_Bene1
Cirrostratus
CirrostratusAh, I thought you meant on the F5. That being the case, you can do this but you'd need to ensure the connections between the F5 and the switches are loop free (no link between the switches for any VLAN the F5 is in) or layer three (routed). In either case, all the links will be active at once but with the layer three method how you setup your routing will influence which links are actively used to pass traffic.
