Forum Discussion
CirrostratusVS STATISTICS
Hi THE_BLUE
This command will show you the total stats on the virtual server from the time the LB was booted ( if that virtual server/s stats were not reset post last boot). If the virtual server stats were reset after the boot then the count you will see after that will be since last counter reset on that virtual server.
It also shows current connection count which refers to current live connections on it in real time.
MVPHi THE_BLUE
This command will show you the total stats on the virtual server from the time the LB was booted ( if that virtual server/s stats were not reset post last boot). If the virtual server stats were reset after the boot then the count you will see after that will be since last counter reset on that virtual server.
It also shows current connection count which refers to current live connections on it in real time.
CirrostratusDear Mayur,
thank you very much.
the command show the below result , so this not real-time ? it is from the time the LB was booted?
Bits In |
Bits Out |
Packets In |
Packets Out |
Current Connections |
Maximum Connections |
Total Connections |
Total Requests |
- Mayur_Sutare
Yes, counts are real-time and will get updated based on the traffic hits.
What I meant was the total count you are seeing under the vServer stats is for the specific period i.e. since last boot/reset till now. Basically, when LB device is reloaded/booted, all the stats counter will be reset ( /becomes zero ). It can also be reset manually by admin. Once the counter is reset by any mean, then the stats will start getting updated based on the further traffic hits.
Hope it helps!
M
