Forum Discussion

Ajene's avatar
Ajene
Icon for Altocumulus rankAltocumulus
Mar 04, 2021

Using Single Configuration File to Configure F5

I'm using the "tmsh load /sys config merge" CLI command to configure an F5 device. This command works great. However, for example, when it comes to configuring an LTM virtual server, by default, it...
application delivery
cli
LTM
scf
single configuration file
  • Ajene's avatar
    Ajene
    Mar 04, 2021

    I found the answer to my question. I was missing the property "ip-protocol tcp". Once I added that, the virtual server type, was automatically set to "Standard", instead of "Performance (Layer 4)", which seems to be set by default, if nothing else is specified. I hope this helps someone in the future!

Ajene's avatar
Ajene
Icon for Altocumulus rankAltocumulus
Mar 04, 2021

I found the answer to my question. I was missing the property "ip-protocol tcp". Once I added that, the virtual server type, was automatically set to "Standard", instead of "Performance (Layer 4)", which seems to be set by default, if nothing else is specified. I hope this helps someone in the future!

  • Lidev's avatar
    Lidev
    Icon for MVP rankMVP
    Mar 09, 2021

    please don't forget to mark your answer as "Select as Best" in order to pass your post as resolved and help other people to find it 😉

    • Ajene's avatar
      Ajene
      Icon for Altocumulus rankAltocumulus
      Mar 16, 2021

      Thanks for the tip. Done.