Forum Discussion
teemo_13
Jan 10, 2023Cirrus
Using 2 Floating IP in the same VLAN for 2 different F5 HA Pairs
For example I want to use only 1 VLAN for the data traffic of 2 different F5 HA Pairs. That would leave me with HA Pair #1, 1 floating, 2 local selfIP HA Pair #2, 1 floating, 2 local selfIP ...
- Jan 10, 2023
It will use the floating IP or self IP of the devices in the HA pair.
The SNAT Automap feature selects a translation address from the available self IP address in the following order of preference:
- Floating self IP addresses on the egress VLAN
- Floating self IP addresses on different VLANs
- Non-floating self IP addresses on the egress VLAN
- Non-floating self IP addresses on different VLANs
https://support.f5.com/csp/article/K7336
mihaic
MVP
It will use the floating IP or self IP of the devices in the HA pair.
The SNAT Automap feature selects a translation address from the available self IP address in the following order of preference:
- Floating self IP addresses on the egress VLAN
- Floating self IP addresses on different VLANs
- Non-floating self IP addresses on the egress VLAN
- Non-floating self IP addresses on different VLANs
https://support.f5.com/csp/article/K7336
Leslie_Hubertus
Jan 18, 2023Ret. Employee
Looks like this is the answer teemo_13 needed, so I'm going to mark it as the Accepted Solution for you mihaic.
Recent Discussions
Related Content
DevCentral Quicklinks
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com
Discover DevCentral Connects