Forum Discussion

Smashytech_2187's avatar
Smashytech_2187
Icon for Cirrus rankCirrus
Apr 04, 2018

Upgrade vCMP host via Big-IQ?

Hi,   We have a viprion chassis, and we manage all our loadbalancers via Big-IQ. However when we try to do a upgrade (minor upgrade 12.1.2 -> 12.1.3.2) via the Big-IQ, we cannot get the config to ...
BIG-IP
BIG-IQ
devops
  • Smashytech_2187's avatar
    Smashytech_2187
    Apr 10, 2018

    We've found what was the cause of our issue.

     

    We have enabled a few services on each virtual F5, like AFM, APM, LTM etc. However these worked fine on our old image. But when our F5 didn't have enough cores or memory assigned to handle the newer version. We did assign 4 cores instead along with more memory. After this was done the installations via Big-IQ worked as intended and everything came up the way it should :)

     

F5_Digger_13600's avatar
F5_Digger_13600
Icon for Cirrus rankCirrus
Apr 06, 2018

What version of BIG-IQ do you use?

 

I have used BIG-IQ since the version 5.2 and started using BIG-IP upgrade through BIG-IQ with the version 5.3.

 

 

With 5.3 and 5.4(recently released), I have never had the manual config copy. One catch with BIG-IQ 5.3 and Viprion vcmp guest, it doesn't support pre- and post assessment feature where BIG-IQ provides pre- and post-upgrade configuration differences such as interface status, vlan, virtual server, pool, monitor and so on.

 

 

 

However with BIG-IQ 5.4, now it is supported, which really decrease the administrative effort after the upgrade.